JJF 1776-2019Program of Pattern Evaluation of Inductive Loop Speed-Measuring Device (English PDF)
机动车地感线圈测速系统型式评价大纲
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JJF 1776-2019 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2019
Implementation date
March 31, 2020
Scope
JJF 1776-2019 is the English-translated version of 机动车地感线圈测速系统型式评价大纲.
JJF 1776-2019 is the Chinese standard "Program of Pattern Evaluation of Inductive Loop Speed-Measuring Device".
Found what you need?
Document preview — JJF 1776-2019
National Standard of the People's Republic of China
- ICS
- 17.160
Contents
- Introduction (III)
- 1 Scope (1)
- 2 References (1)
- 3 Terminology (2)
- 3.1 Ground sense coil (2)
- 3.2 Vehicle detector (2)
- 3.3 Motor vehicle ground sensing coil speed measuring system (2)
- 3.4 Simulation Verification Device of Motor Vehicle Ground Sensing Coil Speed Measurement System (2)
- 3.5 Simulated speed error (2)
- 4 Overview (2)
- 5 Legal management requirements (3)
- 5.1 Unit of measurement (3)
- 5.2 External structure (3)
- 5.3 Logo (3)
- 5.4 Software (3)
- 6 Measurement requirements (3)
- 6.1 Speed measurement range (3)
- 6.2 Simulated speed error (3)
- 6.3 On-site speed measurement error (3)
- 7 General technical requirements (3)
- 7.1 Appearance, structure and functionality (3)
- 7.2 Environmental adaptability (4)
- 7.3 Adaptability of power supply voltage (4)
- 7.4 Electromagnetic immunity (4)
- 7.5 Electrical safety (5)
- 8 Type evaluation items (5)
- 9 Provide the number of prototypes and how to use them (7)
- 9.1 Number of prototypes provided (7)
- 9.2 How to use the prototype (7)
- 10 Test methods and conditions of test items, data processing and qualification criteria (7)
- 10.1 Appearance, structure and functionality (7)
- 10.2 Speed measuring range (7)
- 10.3 Simulated speed error (8)
- 10.4 On-site speed measurement error (8)
- 10.5 Lower operating temperature limit (9)
- 10.6 Upper working temperature limit (9)
- 10.7 Alternating Damp Heat Test (10)
- 10.8 Insulation resistance (10)
- 10.9 Pressure test (10)
- 10.10 Grounding resistance (11)
- 10.11 Power supply voltage adaptability (11)
- 10.12 Electrostatic discharge immunity test (12)
- 10.13 Electrical fast transient burst immunity test (12)
- 10.14 Surge immunity test (12)
- 10.15 Conducted disturbance immunity test (13)
- 10.16 Voltage sag and short-term interruption immunity test (13)
- 10.17 Radio frequency electromagnetic field radiation immunity test (14)
- 10.18 Measurement performance test after electromagnetic compatibility test (14)
- 10.19 Vibration test (15)
- 10.20 Impact test (15)
- 10.21 Measurement performance test after mechanical environmental test (15)
- 10.22 Sand and dust test (16)
- 10.23 Rain test (16)
- 11 Table of measuring instruments and equipment used in the test project (17)
- Appendix A Type Evaluation Record Format (19)
1 Scope (1)
2 References (1)
3 Terminology (2)
3.1 Ground sense coil (2)
3.2 Vehicle detector (2)
3.3 Motor vehicle ground sensing coil speed measuring system (2)
3.4 Simulation Verification Device of Motor Vehicle Ground Sensing Coil Speed Measurement System (2)
3.5 Simulated speed error (2)
4 Overview (2)
5 Legal management requirements (3)
5.1 Unit of measurement (3)
5.2 External structure (3)
5.3 Logo (3)
5.4 Software (3)
6 Measurement requirements (3)
6.1 Speed measurement range (3)
6.2 Simulated speed error (3)
6.3 On-site speed measurement error (3)
7 General technical requirements (3)
7.1 Appearance, structure and functionality (3)
7.2 Environmental adaptability (4)
7.3 Adaptability of power supply voltage (4)
7.4 Electromagnetic immunity (4)
7.5 Electrical safety (5)
8 Type evaluation items (5)
9 Provide the number of prototypes and how to use them (7)
9.1 Number of prototypes provided (7)
9.2 How to use the prototype (7)
10 Test methods and conditions of test items, data processing and qualification criteria (7)
10.1 Appearance, structure and functionality (7)
10.2 Speed measuring range (7)
10.3 Simulated speed error (8)
10.4 On-site speed measurement error (8)
10.5 Lower operating temperature limit (9)
10.6 Upper working temperature limit (9)
10.7 Alternating Damp Heat Test (10)
10.8 Insulation resistance (10)
10.9 Pressure test (10)
10.10 Grounding resistance (11)
10.11 Power supply voltage adaptability (11)
10.12 Electrostatic discharge immunity test (12)
10.13 Electrical fast transient burst immunity test (12)
10.14 Surge immunity test (12)
10.15 Conducted disturbance immunity test (13)
10.16 Voltage sag and short-term interruption immunity test (13)
10.17 Radio frequency electromagnetic field radiation immunity test (14)
10.18 Measurement performance test after electromagnetic compatibility test (14)
10.19 Vibration test (15)
10.20 Impact test (15)
10.21 Measurement performance test after mechanical environmental test (15)
10.22 Sand and dust test (16)
10.23 Rain test (16)
11 Table of measuring instruments and equipment used in the test project (17)
Appendix A Type Evaluation Record Format (19)
Introduction
This outline is based on JJF 1016 "Guidelines for the Compilation of Evaluation Outlines for Measuring Instruments" and JJF 1015 "Types of Measuring Instruments" General Specification for Evaluation", JJF 1001 "General Measurement Terms and Definitions" and JJF 1059.1 "Measurement Uncertainty Evaluation and expression" as the basic norms this outline is published for the first time.
Outline of Type Evaluation of Motor Vehicle Ground Sensing Coil Speed Measurement System
1 Scope
This outline is applicable to the ground sensing line of a motor vehicle that is installed on the road of a motor vehicle and uses the ground sensing coil as the vehicle sensing sensor Type evaluation of lap speed measurement system.
2 Reference documents the outline cited the following documents.
JJG1076-2012 Motor vehicle ground sensing coil speed measuring system verification device GB/T 2423.1-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test A.
Low temperature
GB/T 2423.2-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test B.
high temperature
GB/T 2423.4-2008 Environmental testing for electrical and electronic products. Part 2: Test method test Db.
Alternating damp heat (12h 12h cycle) GB/T 2423.5-1995 Environmental testing for electrical and electronic products. Part 2: Test methods test Ea and Guideline. Impact GB/T 2423.10-2008 Environmental testing for electrical and electronic products. Part 2: Test methods Test Fc.
Vibration (sine)
GB/T 2423.37-2006 Environmental testing for electrical and electronic products Part 2: Test method test L.
Sand and dust test
GB/T 2423.38-2008 Environmental testing for electrical and electronic products. Part 2: Test method test R.
Water test methods and guidelines GB/T 17626.2-2006 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3-2006 Electromagnetic Compatibility Test and Measurement Technology Radio Frequency Electromagnetic Field Radiation Immunity Test GB/T 17626.4-2008 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test GB/T 17626.5-2008 EMC test and measurement technology surge (shock) immunity test GB/T 17626.6-2008 Electromagnetic compatibility test and measurement technology RF field induced conducted disturbance immunity Disturbance GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage sag, short interruption and voltage Varying immunity test GB/T 21255-2007 Motor vehicle speedometer for dated reference documents, only the dated version applies to this outline; for those without date references the latest version (including all amendments) is applicable to this outline.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
How to Download JJF 1776-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1776-2019
$390.00