Valid

JJF 1775-2019Program of Pattern Evaluation of Lidar Speed-Measuring Device (English PDF)

机动车激光测速仪型式评价大纲

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for JJF 1775-2019 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2019

Implementation date

March 31, 2020

Scope

JJF 1775-2019 is the English-translated version of 机动车激光测速仪型式评价大纲.

JJF 1775-2019 is the Chinese standard "Program of Pattern Evaluation of Lidar Speed-Measuring Device".

Found what you need?

Document preview — JJF 1775-2019

National Standard of the People's Republic of China

ICS
17.160

Contents

  • Introduction (III)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Term (2)
  • 3.1 Pulse laser speed measurement (2)
  • 3.2 Motor vehicle laser speedometer (2)
  • 3.3 Motor vehicle laser speed measurement unit (2)
  • 3.4 Motor vehicle laser speedometer simulation verification device (2)
  • 3.5 Simulate standard speed value (2)
  • 3.6 Analog speed measurement error (2)
  • 3.7 Pulse repetition rate of change (2)
  • 4 Overview (2)
  • 5 Legal management requirements (3)
  • 5.1 Unit of measurement (3)
  • 5.2 External structure (3)
  • 5.3 Logo (3)
  • 5.4 Software(3)
  • 6 Measurement requirements (3)
  • 6.1 Speed measurement range (3)
  • 6.2 Analog speed measurement error (3)
  • 6.3 Error of on-site speed measurement (4)
  • 6.4 Pulse repetition rate of change (4)
  • 7 General technical requirements (4)
  • 7.1 Appearance, structure and functionality (4)
  • 7.2 Environmental adaptability (4)
  • 7.3 Power supply voltage adaptability (5)
  • 7.4 Electromagnetic immunity (5)
  • 7.5 Eye safety(5)
  • 7.6 Electrical safety(6)
  • 8 Type evaluation items (6)
  • 9 Provide the number of prototypes and how to use the prototypes (7)
  • 9.1 Number of prototypes provided (7)
  • 9.2 How to use the prototype (7)
  • 10 Test methods and conditions of test items, data processing and qualification criteria (7)
  • 10.1 Appearance, structure and functionality (7)
  • 10.2 Speed measurement range (8)
  • 10.3 Error of analog speed measurement (8)
  • 10.4 Error of on-site speed measurement (9)
  • 10.5 Pulse repetition rate of change (9)
  • 10.6 Lower limit of operating temperature (10)
  • 10.7 Upper working temperature (11)
  • 10.8 Alternating damp heat test (11)
  • 10.9 Insulation resistance (11)
  • 10.10 Withstand voltage test (12)
  • 10.11 Ground on-resistance (12)
  • 10.12 Eye safety (13)
  • 10.13 Power supply voltage adaptability (13)
  • 10.14 Electrostatic discharge immunity test (13)
  • 10.15 Electrical fast transient pulse group immunity test (14)
  • 10.16 Surge immunity test (14)
  • 10.17 Conducted disturbance immunity test (15)
  • 10.18 Voltage sag and short-term interruption immunity test (15)
  • 10.19 Radio frequency electromagnetic field radiation immunity test (16)
  • 10.20 Metrological performance test after electromagnetic compatibility test (16)
  • 10.21 Vibration test (16)
  • 10.22 Impact test (17)
  • 10.23 Metrological performance test after mechanical environment test (17)
  • 10.24 Sand and dust test (18)
  • 10.25 Rain test (18)
  • 11 Table of measuring instruments and equipment used in the test items (18)
  • Appendix A Type Evaluation Record Format (21)

1 Scope (1)

2 Reference documents (1)

3 Term (2)

3.1 Pulse laser speed measurement (2)

3.2 Motor vehicle laser speedometer (2)

3.3 Motor vehicle laser speed measurement unit (2)

3.4 Motor vehicle laser speedometer simulation verification device (2)

3.5 Simulate standard speed value (2)

3.6 Analog speed measurement error (2)

3.7 Pulse repetition rate of change (2)

4 Overview (2)

5 Legal management requirements (3)

5.1 Unit of measurement (3)

5.2 External structure (3)

5.3 Logo (3)

5.4 Software(3)

6 Measurement requirements (3)

6.1 Speed measurement range (3)

6.2 Analog speed measurement error (3)

6.3 Error of on-site speed measurement (4)

6.4 Pulse repetition rate of change (4)

7 General technical requirements (4)

7.1 Appearance, structure and functionality (4)

7.2 Environmental adaptability (4)

7.3 Power supply voltage adaptability (5)

7.4 Electromagnetic immunity (5)

7.5 Eye safety(5)

7.6 Electrical safety(6)

8 Type evaluation items (6)

9 Provide the number of prototypes and how to use the prototypes (7)

9.1 Number of prototypes provided (7)

9.2 How to use the prototype (7)

10 Test methods and conditions of test items, data processing and qualification criteria (7)

10.1 Appearance, structure and functionality (7)

10.2 Speed measurement range (8)

10.3 Error of analog speed measurement (8)

10.4 Error of on-site speed measurement (9)

10.5 Pulse repetition rate of change (9)

10.6 Lower limit of operating temperature (10)

10.7 Upper working temperature (11)

10.8 Alternating damp heat test (11)

10.9 Insulation resistance (11)

10.10 Withstand voltage test (12)

10.11 Ground on-resistance (12)

10.12 Eye safety (13)

10.13 Power supply voltage adaptability (13)

10.14 Electrostatic discharge immunity test (13)

10.15 Electrical fast transient pulse group immunity test (14)

10.16 Surge immunity test (14)

10.17 Conducted disturbance immunity test (15)

10.18 Voltage sag and short-term interruption immunity test (15)

10.19 Radio frequency electromagnetic field radiation immunity test (16)

10.20 Metrological performance test after electromagnetic compatibility test (16)

10.21 Vibration test (16)

10.22 Impact test (17)

10.23 Metrological performance test after mechanical environment test (17)

10.24 Sand and dust test (18)

10.25 Rain test (18)

11 Table of measuring instruments and equipment used in the test items (18)

Appendix A Type Evaluation Record Format (21)

Introduction

This syllabus is based on JJF 1016 "Guidelines for the Compilation of Measurement Apparatus Type Evaluation Outline", JJF 1015 "Measurement Apparatus Type General Specification for Evaluation, JJF 1001 General Measurement Terms and Definitions and JJF 1059.1 Evaluation of Uncertainty in Measurement "And Representation" is compiled as a basic specification.

This outline is issued for the first time.

Motor Vehicle Laser Speedometer Type Evaluation Outline

1 Scope

This syllabus is applicable to motor vehicle laser speedometers that use the principle of pulsed laser speed measurement, including automatic monitoring of motor vehicle speeding.

Type evaluation of laser speed measurement unit (hereinafter referred to as laser speed measurement unit) of the measurement system.

2 Reference documents this outline refers to the following documents.

JJG1074-2012 Motor Vehicle Laser Speedometer GB/T 2423.1-2008 Environmental testing of electric and electronic products Part 2: Test method Test A. Low temperature GB/T 2423.2-2008 Environmental testing of electric and electronic products Part 2: Test method Test B. High temperature GB/T 2423.4-2008 Environmental testing of electrical and electronic products Part 2: Test method Test Db. Alternating damp heat (12h 12h cycle) GB/T 2423.5-1995 Environmental testing of electric and electronic products Part 2: Test method Test Ea and guideline. Impact GB/T 2423.10-2008 Environmental testing of electric and electronic products Part 2: Test method Test Fc. Vibration (sinusoidal) GB/T 2423.37-2006 Environmental testing of electric and electronic products Part 2: Test method Test L. Sand dust test GB/T 2423.38-2008 Environmental testing of electrical and electronic products Part 2: Test methods Test R. Water test methods and guidelines GB 7247.1-2001 Safety of Laser Products Part 1: Equipment Classification, Requirements and User Guide GB/T 17626.2-2006 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3-2006 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test GB/T 17626.4-2008 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test GB/T 17626.5-2008 Electromagnetic compatibility test and measurement technology surge (impact) immunity test GB/T 17626.6-2008 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test GB/T 21255-2007 Motor Vehicle Speedometer General technical requirements for laser speedometers for motor vehicles

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

How to Download JJF 1775-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1775-2019

$500.00