JJF 1772-2019Program of Pattern Evaluation of Trial Case Lenses (English PDF)
验光镜片箱型式评价大纲
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JJF 1772-2019 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2019
Implementation date
March 31, 2020
Scope
JJF 1772-2019 is the English-translated version of 验光镜片箱型式评价大纲.
JJF 1772-2019 is the Chinese standard "Program of Pattern Evaluation of Trial Case Lenses".
Found what you need?
Document preview — JJF 1772-2019
National Standard of the People's Republic of China
- ICS
- 17.180
Contents
- Introduction (III)
- 1 Scope (1)
- 2 References (1)
- 3 Terms and definitions (1)
- 3.1 Top power (1)
- 3.2 Back top power (1)
- 3.3 Prism degree (1)
- 3.4 Full aperture refraction lenses (2)
- 3.5 Reducing aperture refraction lenses (2)
- 3.6 Superimposed lens chain (2)
- 3.7 Spherical lenses (2)
- 3.8 Cylindrical Optometry Lenses (2)
- 4 Overview (2)
- 4.1 Classification (2)
- 4.2 Uses (2)
- 5 Legal management requirements (2)
- 5.1 Unit of measurement (2)
- 5.2 Logo (2)
- 6 Measurement requirements (3)
- 6.1 Wrong film (3)
- 6.2 Indication error of top power (3)
- 6.3 Indication error of optical center displacement (4)
- 6.4 Cylindrical optometry lens axis position indication error (4)
- 6.5 Baseline indication error of prismatic optometry lenses (4)
- 7 General technical requirements (5)
- 7.1 Appearance (5)
- 7.2 Basic configuration (5)
- 7.3 Optometry lens logo (6)
- 7.4 Climate environment adaptability (7)
- 8 Type evaluation items (7)
- 9 Provide technical data and test prototype for review (7)
- 9.1 Technical data (7)
- 9.2 Number of prototypes provided (7)
- 9.3 How to use the prototype (8)
- 10 Test methods and conditions for type evaluation items (8)
- 10.1 Preparation before the test (8)
- 10.2 Appearance (8)
- 10.3 Wrong film (8)
- 10.4 Indication error of top power (8)
- 10.5 Indication error of optical center displacement (9)
- 10.6 Cylindrical axis position indication error (10)
- 10.7 Indication error of prism baseline (10)
- 10.8 Basic configuration (11)
- 10.9 Optometry lens logo (11)
- 10.10 Climate and environmental adaptability (11)
- 10.11 Judgment of type evaluation results (12)
- 11 Table of measuring instruments and equipment used in the test project
- Appendix A. The original record format of type evaluation of optometry lenses (14)
- Appendix B. Judgment of the evaluation results of the type of optometry lenses
1 Scope (1)
2 References (1)
3 Terms and definitions (1)
3.1 Top power (1)
3.2 Back top power (1)
3.3 Prism degree (1)
3.4 Full aperture refraction lenses (2)
3.5 Reducing aperture refraction lenses (2)
3.6 Superimposed lens chain (2)
3.7 Spherical lenses (2)
3.8 Cylindrical Optometry Lenses (2)
4 Overview (2)
4.1 Classification (2)
4.2 Uses (2)
5 Legal management requirements (2)
5.1 Unit of measurement (2)
5.2 Logo (2)
6 Measurement requirements (3)
6.1 Wrong film (3)
6.2 Indication error of top power (3)
6.3 Indication error of optical center displacement (4)
6.4 Cylindrical optometry lens axis position indication error (4)
6.5 Baseline indication error of prismatic optometry lenses (4)
7 General technical requirements (5)
7.1 Appearance (5)
7.2 Basic configuration (5)
7.3 Optometry lens logo (6)
7.4 Climate environment adaptability (7)
8 Type evaluation items (7)
9 Provide technical data and test prototype for review (7)
9.1 Technical data (7)
9.2 Number of prototypes provided (7)
9.3 How to use the prototype (8)
10 Test methods and conditions for type evaluation items (8)
10.1 Preparation before the test (8)
10.2 Appearance (8)
10.3 Wrong film (8)
10.4 Indication error of top power (8)
10.5 Indication error of optical center displacement (9)
10.6 Cylindrical axis position indication error (10)
10.7 Indication error of prism baseline (10)
10.8 Basic configuration (11)
10.9 Optometry lens logo (11)
10.10 Climate and environmental adaptability (11)
10.11 Judgment of type evaluation results (12)
11 Table of measuring instruments and equipment used in the test project
Appendix A. The original record format of type evaluation of optometry lenses (14)
Appendix B. Judgment of the evaluation results of the type of optometry lenses
Introduction
This type evaluation outline is based on JJF 1015-2014 "General Specification for Type Evaluation of Measuring Instruments", JJF 1016-2014 "Guidelines for the Compilation of Outlines for Measuring Apparatus Type Evaluation" and JJF 1051-2014 "Code for Nomenclature and Classification of Measuring Apparatus" Code "preparation.
The technical indicators of this type evaluation outline refer to JJG579-2010 "Refractive Lens Box", GB 17342-2009 "Ophthalmic Instruments Optometry Lens", ISO 9801.:2009 "Ophthalmic Instruments Optometry Lens Box" (Ophthalmic instruments-Trailcaselenses) and other technical documents, of which JJG579-2010 is the primary reference standard.
This type evaluation outline is released for the first time.
Outline of evaluation of type of optometry lens box
1 Scope
This type evaluation program is applicable to the type evaluation of the refraction lens box with the classification code of 33720000.
2 Reference documents the following documents are cited in this type evaluation outline.
JJG579 Optometry Lens Case GB 17342 Ophthalmic Instruments Optometry Lenses ISO 9801 Ophthalmic Instruments Optometry Lens Box (Ophthalmicinstruments-Trailcaselenses) for dated reference documents, only the dated version is applicable to this type of evaluation outline; those that are not dated the latest version (including all amendments) of the cited documents is applicable to this type evaluation outline.
3 Terms and definitions
3.1 Top power vertexpower the reciprocal of the paraxial focal length of the lens in meters.
Note. A lens contains two top and bottom power.
3.2 Back-vertexpower the reciprocal of the focal length of the lens's paraxial back vertex in meters. As shown in Figure 1, the distance from the back vertex of the lens to the focal point of the image side the distance is called the back top focal length, which is represented by the symbol lf '. Its reciprocal is called the back vertex power, or 1/lf '. Unit of back vertex power it is the reciprocal of the meter (m-1), and the unit name is diopter.
Note. Unless otherwise specified, the top power of the lens refers to the back top power.
3.3 Prism power
A measure of the deviation of light after passing a specified point on the lens (usually the center of the lens), a unit of prism it is centimeters per meter (cm/m), and the unit name is prism diopter.
F-object focus; F'-image focus; H-object principal point; H'-image principal point;
f-object square focal length; f'-image square focal length; lf-front top focal length; lf'-back top focal length
Figure 1 Schematic diagram of the top focal length of the lens
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
How to Download JJF 1772-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1772-2019
$505.00