JJF 1766-2019Rules of Metrology Testing for Energy Efficiency of Water Chilling Packages (English PDF)
冷水机组能源效率计量检测规则
This is a limited preview
Buy now to download the full PDF (28 pages)
Need quotation for your management?
Get a formal quotation for JJF 1766-2019 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2019
Implementation date
December 27, 2019
Scope
JJF 1766-2019 is the English-translated version of 冷水机组能源效率计量检测规则.
JJF 1766-2019 is the Chinese standard "Rules of Metrology Testing for Energy Efficiency of Water Chilling Packages".
Found what you need?
Document preview — JJF 1766-2019
National Standard of the People's Republic of China
- ICS
- 17.020
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Reference documents (1)
- 3 Terms and measurement units (1)
- 3.1 Cooling capacity(1)
- 3.2 Total electric power consumption (1)
- 3.3 Coefficient of Performance (COP) (2)
- 3.4 Integrated Part Load Performance Factor (IPLV) (2)
- 3.5 Energy efficiency limit value (2)
- 3.6 Energy efficiency rating (2)
- 3.7 Liquid refrigerant method (2)
- 4 Overview (2)
- 5 Measurement requirements (2)
- 5.1 Energy efficiency labeling (2)
- 5.2 Energy efficiency indicators (energy consumption) (3)
- 5.3 Energy efficiency rating (4)
- 6 Testing conditions (4)
- 6.1 Environmental conditions (4)
- 6.2 Measuring equipment (4)
- 6.3 Tolerance of temperature and flow measurement values (4)
- 6.4 Measurement uncertainty (5)
- 7 Test items and methods (5)
- 7.1 Principles of sampling (5)
- 7.2 Sample testing (5)
- 7.3 Original record (8)
- 7.4 Data processing(8)
- 8 Test results (8)
- 8.1 Eligibility criteria for energy efficiency indicators (energy consumption) measurement test results (8)
- 8.2 Judgment criteria for test results (9)
- 8.3 Test report (10)
- Appendix A Measuring Method of Cooling Capacity of Water Chiller (11)
- Appendix B Air inlet temperature measurement of air-cooled and evaporative-cooled chillers (13)
- Appendix C Example of Uncertainty Evaluation for Energy Efficiency Measurement of Chillers (16)
- Appendix D Sampling Sheet for Energy Efficiency Measurement and Testing of Chillers (Format) (22)
- Appendix E Original Record of Energy Efficiency Measurement and Testing of Chillers (Format) (23)
- Appendix F Energy Efficiency Measurement and Test Report of Chillers (Format) (30)
1 Scope (1)
2 Reference documents (1)
3 Terms and measurement units (1)
3.1 Cooling capacity(1)
3.2 Total electric power consumption (1)
3.3 Coefficient of Performance (COP) (2)
3.4 Integrated Part Load Performance Factor (IPLV) (2)
3.5 Energy efficiency limit value (2)
3.6 Energy efficiency rating (2)
3.7 Liquid refrigerant method (2)
4 Overview (2)
5 Measurement requirements (2)
5.1 Energy efficiency labeling (2)
5.2 Energy efficiency indicators (energy consumption) (3)
5.3 Energy efficiency rating (4)
6 Testing conditions (4)
6.1 Environmental conditions (4)
6.2 Measuring equipment (4)
6.3 Tolerance of temperature and flow measurement values (4)
6.4 Measurement uncertainty (5)
7 Test items and methods (5)
7.1 Principles of sampling (5)
7.2 Sample testing (5)
7.3 Original record (8)
7.4 Data processing(8)
8 Test results (8)
8.1 Eligibility criteria for energy efficiency indicators (energy consumption) measurement test results (8)
8.2 Judgment criteria for test results (9)
8.3 Test report (10)
Appendix A Measuring Method of Cooling Capacity of Water Chiller (11)
Appendix B Air inlet temperature measurement of air-cooled and evaporative-cooled chillers (13)
Appendix C Example of Uncertainty Evaluation for Energy Efficiency Measurement of Chillers (16)
Appendix D Sampling Sheet for Energy Efficiency Measurement and Testing of Chillers (Format) (22)
Appendix E Original Record of Energy Efficiency Measurement and Testing of Chillers (Format) (23)
Appendix F Energy Efficiency Measurement and Test Report of Chillers (Format) (30)
Introduction
To standardize the energy efficiency measurement of vapor compression cycle chilled water (heat pump) units that implement energy efficiency label management in accordance with the requirements of JJF 1261.1-2017 "Energy Efficiency Measurement and Testing Rules for Energy-using Products", this specification.
This specification is released for the first time.
Energy efficiency of chillers Measurement and detection rules
1 Scope
This specification specifies the vapor compression cycle chilled water (heat pump) unit (hereinafter referred to as "cold water" Unit") energy efficiency measurement requirements, measurement testing procedures, measurement testing methods, measurement testing results Rules and test reports.
This specification applies to the energy efficiency measurement supervision and testing of chillers, and the commissioned testing can refer to this specification. produce and the unit that sells chillers can also conduct inspections with reference to this specification.
The chiller to be tested should be a product qualified by the manufacturer's self-inspection, or imported and sold by the seller commodity.
2 Reference documents this specification refers to the following documents.
JJF 1261.1-2017 Energy efficiency measurement and testing rules for energy-using products GB/T 2829-2002 Periodic Inspection Attribute Sampling Procedure and Table (Applicable to the Inspection of Process Stability) GB/T 10870-2014 vapor compression cycle chilled water (heat pump) unit performance test method GB/T 18430.1-2007 Vapor compression cycle chilled water (heat pump) unit Part 1: Industrial or commercial Cold water (heat pump) units for use and similar purposes GB/T 18430.2-2016 Vapor compression cycle chilled water (heat pump) unit Part 2: Household and similar Purpose of cold water (heat pump) unit GB 19577-2015 Energy efficiency limit values and energy efficiency grades for chillers for dated reference documents, only the dated version applies to this specification; for undated references the latest version (including all amendments) is applicable to this specification.
3 Terms and units of measurement the following terms and measurement units apply to this specification.
3.1 Refrigeration capacity ratedtotalrefigeratingcapacity the heat absorbed by the refrigerant from the cold water in the unit evaporator per unit time, that is, the mass flow of cold water multiplied by the evaporation the product of the difference between the inlet and outlet cold water specific enthalpy, the unit of measurement is kW.
3.2 Total electric power consumption ratedtotalgrosselectricpower Under the specified refrigeration (heat) capacity test conditions, the sum of the input power consumed by the unit during operation. Measure the unit is kW.
Note.
1 The total electric power consumption includes the input power of the compressor motor, oil pump motor, electric heater and operation control circuit.
2 For air-cooled units, the total electrical power consumption also includes cooling fan power; for evaporative cooling units, the total input power is also
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.
How to Download JJF 1766-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1766-2019
$515.00