Valid

JJF 1760-2019Calibration Specification for Standard Slices of Single Crystal Silicon Resistivity (English PDF)

硅单晶电阻率标准样片校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JJF 1760-2019 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2019

Implementation date

March 27, 2020

Scope

JJF 1760-2019 is the English-translated version of 硅单晶电阻率标准样片校准规范.

JJF 1760-2019 is the Chinese standard "Calibration Specification for Standard Slices of Single Crystal Silicon Resistivity".

Found what you need?

Document preview — JJF 1760-2019

National Standard of the People's Republic of China

ICS
17.220

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 References (1)
  • 3 Terms and units of measurement (1)
  • 3.1 Resistivity (1)
  • 3.2 Thickness (1)
  • 3.3 Diameter (1)
  • 3.4 Sheet resistance (1)
  • 3.5 Conductivity type (1)
  • 3.6 Four probes (1)
  • 3.7 Uniformity of local radial resistivity (1)
  • 4 Overview (2)
  • 5 Metrological characteristics (2)
  • 5.1 Measuring range of standard sample resistivity (2)
  • 5.2 The nominal value of the resistivity of the standard sample (2)
  • 5.3 Parameters and performance requirements of standard samples (2)
  • 6 Calibration conditions (3)
  • 6.1 Environmental conditions (3)
  • 6.2 Calibration equipment (3)
  • 7 Calibration items and calibration methods (3)
  • 7.1 Calibration items (3)
  • 7.2 Visual inspection (4)
  • 7.3 Determination of conductivity type (4)
  • 7.4 Diameter measurement (4)
  • 7.5 Thickness measurement (4)
  • 7.6 Resistivity or sheet resistance measurement (5)
  • 7.7 Local Radial Resistivity Uniformity Measurement (6)
  • 8 Expression of calibration results (7)
  • 9 Recalibration interval (7)
  • Appendix A Original Record Format (8)
  • Appendix B. Internal page format of the calibration certificate (10)
  • Appendix C Examples of Uncertainty Evaluation of Calibration for Major Projects (11)
  • Appendix D. Standard sample thickness correction coefficient table (16)
  • Appendix E Standard Sample Diameter Correction Factor (17)
  • Appendix F Standard Sample Resistivity Temperature Coefficient Table (18)

1 Scope (1)

2 References (1)

3 Terms and units of measurement (1)

3.1 Resistivity (1)

3.2 Thickness (1)

3.3 Diameter (1)

3.4 Sheet resistance (1)

3.5 Conductivity type (1)

3.6 Four probes (1)

3.7 Uniformity of local radial resistivity (1)

4 Overview (2)

5 Metrological characteristics (2)

5.1 Measuring range of standard sample resistivity (2)

5.2 The nominal value of the resistivity of the standard sample (2)

5.3 Parameters and performance requirements of standard samples (2)

6 Calibration conditions (3)

6.1 Environmental conditions (3)

6.2 Calibration equipment (3)

7 Calibration items and calibration methods (3)

7.1 Calibration items (3)

7.2 Visual inspection (4)

7.3 Determination of conductivity type (4)

7.4 Diameter measurement (4)

7.5 Thickness measurement (4)

7.6 Resistivity or sheet resistance measurement (5)

7.7 Local Radial Resistivity Uniformity Measurement (6)

8 Expression of calibration results (7)

9 Recalibration interval (7)

Appendix A Original Record Format (8)

Appendix B. Internal page format of the calibration certificate (10)

Appendix C Examples of Uncertainty Evaluation of Calibration for Major Projects (11)

Appendix D. Standard sample thickness correction coefficient table (16)

Appendix E Standard Sample Diameter Correction Factor (17)

Appendix F Standard Sample Resistivity Temperature Coefficient Table (18)

Introduction

This specification is based on JJF 1071-2010 "Rules for Compiling National Measurement and Calibration Specifications" and JJF 1059.1-2012 Compilation of "Measurement Uncertainty Evaluation and Representation".

This specification replaces JJG48-2004 "Silicon Single Crystal Resistivity Standard Sample", compared with JJG48-2004, except in addition to the editorial changes, the main technical changes are as follows.

--- Added introduction, cited documents, terminology and unit of measurement;

--- Removed the level classification of silicon single crystal resistivity standard samples;

--- Removed the cleaning method of silicon single crystal resistivity standard sample;

--- Modified the measurement range of resistivity, changed from the original 0.005ohm · cm ~ 5000ohm · cm 0.003ohm · cm ~ 1000ohm · cm;

--- Modified the calibration method of the silicon single crystal resistivity standard sample diameter;

--- Modified the calibration method of silicon single crystal resistivity standard sample thickness;

--- Modified the calibration method of the uniformity of the radial resistivity of the standard sample of silicon single crystal resistivity.

Previous releases of this specification.

--- JJG48-2004;

--- JJG48-1990.

Calibration Specification for Standard Sample of Silicon Single Crystal Resistivity

1 Scope

This specification applies to silicon single crystal resistivity standard samples with resistivity between 0.003ohm · cm ~ 1000ohm · cm Calibration.

2 Reference documents this specification refers to the following documents.

JJG508-2004 Four Probe Resistivity Tester GB/T 14264 Terminology of semiconductor materials for dated reference documents, only the dated version applies to this specification; for those without date references the latest version (including all amendments) is applicable to this specification.

3 Terms and units of measurement

3.1 Resistivity

A measure of the degree to which a charged carrier is blocked by a material. Resistivity is the reciprocal of conductivity. Symbol is rho, unit it is ohm · cm.

3.2 Thickness

The distance through the wafer through a given point on the wafer perpendicular to the surface direction. Usually the thickness of the geometric center of the wafer is the nominal thickness of the wafer. The unit is µm.

3.3 diameter

The length of the line that traverses the surface of the wafer, passes the center point of the wafer, and does not intersect with the reference plane or other reference areas on the circumference degree. The unit is mm.

3.4 Sheet resistance the sheet resistance of a semiconductor or thin metal film, the potential gradient parallel to the current multiplied by the current density and thickness ratio. Also called square resistance. The symbol is Rs and the unit is ohm/-.

3.5 Conductivity type Conductive characteristics determined by the nature of most carriers in semiconductor materials.

3.6 Four-point probe A point probe device for measuring the resistivity of materials. One pair of probes is used to pass the current flowing through the sample, the other the probe measures the potential difference caused by the current.

3.7 Regional uniformity of radialresistivity the center point of the wafer and a number of symmetrically distributed set points (typical settings the change of resistivity between the radius of 5mm and the radius of 10mm from the center point is taken. Divide the maximum difference by medium Interval, expressed as a percentage.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

How to Download JJF 1760-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1760-2019

$445.00