Valid

JJF 1742-2019Calibration Specification for High Definition Video Signal Generators (English PDF)

高清视频信号发生器校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (41 pages)

Need quotation for your management?

Get a formal quotation for JJF 1742-2019 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2019

Implementation date

December 27, 2019

Scope

JJF 1742-2019 is the English-translated version of 高清视频信号发生器校准规范.

JJF 1742-2019 is the Chinese standard "Calibration Specification for High Definition Video Signal Generators".

Found what you need?

Document preview — JJF 1742-2019

National Standard of the People's Republic of China

ICS
17.220

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Terms and measurement units (1)
  • 4 Overview (1)
  • 5 Measurement characteristics (2)
  • 5.1 RGB analog primary color video image signal (2)
  • 5.2 YPBPR analog component video image signal (3)
  • 5.3 Synchronization signal (5)
  • 5.4 Drive signal (5)
  • 6 Calibration conditions (6)
  • 6.1 Environmental conditions (6)
  • 6.2 Measurement standards and other equipment (6)
  • 7 Calibration items and calibration methods (7)
  • 7.1 Calibration items (7)
  • 7.2 Appearance and working normality inspection (7)
  • 7.3 RGB analog primary color video image signal (7)
  • 7.4 YPBPR analog component video image signal (10)
  • 7.5 Synchronization signal(12)
  • 7.6 Drive signal(14)
  • 8 Calibration result expression (15)
  • 9 Re-calibration interval (16)
  • Appendix A Original Record Format (17)
  • Appendix B Internal page format of calibration certificate (32)
  • Appendix C Evaluation Example of Measurement Uncertainty (47)
  • Appendix D HD video signal definition (52)

1 Scope (1)

2 Reference documents (1)

3 Terms and measurement units (1)

4 Overview (1)

5 Measurement characteristics (2)

5.1 RGB analog primary color video image signal (2)

5.2 YPBPR analog component video image signal (3)

5.3 Synchronization signal (5)

5.4 Drive signal (5)

6 Calibration conditions (6)

6.1 Environmental conditions (6)

6.2 Measurement standards and other equipment (6)

7 Calibration items and calibration methods (7)

7.1 Calibration items (7)

7.2 Appearance and working normality inspection (7)

7.3 RGB analog primary color video image signal (7)

7.4 YPBPR analog component video image signal (10)

7.5 Synchronization signal(12)

7.6 Drive signal(14)

8 Calibration result expression (15)

9 Re-calibration interval (16)

Appendix A Original Record Format (17)

Appendix B Internal page format of calibration certificate (32)

Appendix C Evaluation Example of Measurement Uncertainty (47)

Appendix D HD video signal definition (52)

Introduction

This specification is based on JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications" and JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty" was compiled.

This specification mainly stipulates the calibration method of HD video signal generator with analog component output.

This specification refers to GB 3659-1983 "TV Video Channel Test Method", SJ/T 11332 "Digital TV Receiver Equipment Interface Specification Part 6: RGB Analog Primary Color Video Signal Interface", SJ/T 11333 "Digital TV Reception Equipment Interface Specification Part 7: YPBPR Analog Component Video Signal Interface" and other currently valid versions.

In Appendix C, calibration items such as high-definition video level, inter-channel delay, signal-to-noise ratio, driving signal amplitude, etc. are given

Example of evaluation of measurement uncertainty. The definition of high-definition video signal is given in Appendix D, including. signal system the definition of formula, signal conversion and image signal waveform.

This specification is released for the first time.

HD video signal generator calibration specification

1 Scope

This specification applies to the calibration of high-definition video signal generators with analog component output.

2 Reference documents this specification refers to the following documents.

GB 3659-1983 TV video channel test method SJ/T 11332 Digital TV receiving equipment interface specification Part 6: RGB analog primary color video signal interface SJ/T 11333 Digital TV receiving equipment interface specification Part 7: YPBPR analog component video signal interface for dated reference documents, only the dated version applies to this specification; for undated references the latest version (including all amendments) is applicable to this specification.

3 Terms and units of measurement

3.1 RGB analog element video signal RGB analogelementvideosignal Red (R), green (G), blue with the same bandwidth, with or with additional synchronization information, synchronized with each other, gamma-corrected (B) Three primary color analog video signals.

3.2 YPBPR analog component video signal YPBPRanalogcomponentvideosignal Y, PB, and PR signals are brightness signal (Y), blue difference signal (BY) and red difference signal (RY) respectively the analog signal obtained by multiplying the amplitude value of a scale factor. At least the Y signal contains a sync pulse signal.

3.3 Bipolar three-level synchronizing pulse signal A synchronization signal composed of negative and positive pulses and 0 level.

The tick corresponds to the scan synchronization timing reference.

3.4 video signal-to-noise ratio the ratio of the video signal level value to the effective value of the noise amplitude is calculated according to formula (1).

S/N=20×lg

Nrms

Where.

S/N---Video signal-to-noise ratio, dB;

V---Video signal level value, take 700mV;

Nrms---the effective value of the noise amplitude, mV.

4 overview

The high-definition video signal generator can generate various high-definition video image test signals, including color bar signals, ladder signals

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.

How to Download JJF 1742-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
41 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1742-2019

$1,209.00