JJF 1739-2019Calibration Specification for Digital Laser Spherical Interferometers (English PDF)
数字式激光球面干涉仪校准规范
This is a limited preview
Buy now to download the full PDF (13 pages)
Need quotation for your management?
Get a formal quotation for JJF 1739-2019 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2019
Implementation date
December 27, 2019
Scope
JJF 1739-2019 is the English-translated version of 数字式激光球面干涉仪校准规范.
JJF 1739-2019 is the Chinese standard "Calibration Specification for Digital Laser Spherical Interferometers".
Found what you need?
Document preview — JJF 1739-2019
National Standard of the People's Republic of China
- ICS
- 17.040
Contents
- Introduction (II)
- 1 Scope (1)
- 2 References (1)
- 3 Terms and definitions (1)
- 3.1 Surface deviation (1)
- 3.2 Peak-valley value (1)
- 3.3 PVr value (1)
- 3.4 F number of spherical elements (1)
- 4 Overview (1)
- 5 Metrological characteristics (2)
- 5.1 Indication error (2)
- 5.2 Measurement repeatability (2)
- 6 Calibration conditions (2)
- 6.1 Environmental conditions (2)
- 6.2 Calibration standard (2)
- 7 Calibration items and calibration methods (3)
- 7.1 Indication error (3)
- 7.2 Measurement repeatability (5)
- 8 Expression of calibration results (5)
- 9 Recalibration time interval (5)
- Appendix A PVr Value (6)
- Appendix B Derivation of the three-position method formula (7)
- Appendix C Example of Evaluation of Calibration Uncertainty of Digital Laser Spherical Interferometer Direct Comparison Method (9)
- Appendix D Example of Uncertainty Evaluation of Three-position Calibration of Digital Laser Spherical Interferometer (11)
- Appendix E Calibration Certificate Information and Internal Page Format (15)
1 Scope (1)
2 References (1)
3 Terms and definitions (1)
3.1 Surface deviation (1)
3.2 Peak-valley value (1)
3.3 PVr value (1)
3.4 F number of spherical elements (1)
4 Overview (1)
5 Metrological characteristics (2)
5.1 Indication error (2)
5.2 Measurement repeatability (2)
6 Calibration conditions (2)
6.1 Environmental conditions (2)
6.2 Calibration standard (2)
7 Calibration items and calibration methods (3)
7.1 Indication error (3)
7.2 Measurement repeatability (5)
8 Expression of calibration results (5)
9 Recalibration time interval (5)
Appendix A PVr Value (6)
Appendix B Derivation of the three-position method formula (7)
Appendix C Example of Evaluation of Calibration Uncertainty of Digital Laser Spherical Interferometer Direct Comparison Method (9)
Appendix D Example of Uncertainty Evaluation of Three-position Calibration of Digital Laser Spherical Interferometer (11)
Appendix E Calibration Certificate Information and Internal Page Format (15)
Introduction
The preparation of this specification is based on JJF 1071-2010 "Rules for Compiling National Measurement and Calibration Specifications" "General Measurement Terms and Definitions" and JJF 1059.1-2012 "Measurement Uncertainty Evaluation and Expression" as the basis and in accordance with.
This specification is the first release.
Calibration Specification of Digital Laser Spherical Interferometer
1 Scope
This specification applies to the calibration of digital laser spherical interferometers.
2 Reference documents this specification refers to the following documents.
JJF 1100-2016 Calibration Specification for Plane Constant Thickness Interferometer GB/T 2831-2009 Surface deviation of optical parts ISO 14999-4.:2015 Interferometry of optical and photonic optics and optical systems. Part 4.
Description and evaluation of tolerances specified in ISO 10110 (Optics and photonics-Interferometricmeasurement ofopticalelementsandopticalsystems-Part 4. Interpretationandevaluationoftoler-ancesspecifiedinISO 10110) for dated reference documents, only the dated version applies to this specification; for those without date references the latest version (including all amendments) is applicable to this specification.
3 Terms and definitions the terms and definitions defined in GB/T 2831-2009 and ISO 14999-4.:2015 and the following apply to this specification.
3.1 Surface form deviation the deviation of the measured optical surface relative to the reference optical surface.
3.2 Peak-to-valey (PV) value the maximum value of surface deviation minus the minimum value, referred to as PV value.
3.3 PVr value robustpeak-to-valey (PVr) value 36-term Zernike polynomial fitting of surface shape deviation plus surface PV value plus 3 times fitting residuals (surface shape deviation minus 36 items Zernike polynomial fitting surface) root mean square value.
Note. The definition of Zernike polynomials is defined according to the ISO 14999-4.:2015 Appendix B standard.
3.4 F number of spherical optics the ratio of the radius of curvature of the spherical surface to the clear aperture.
Note. The F number of the spherical element under test should be less than or equal to the F number of the spherical lens of the digital laser spherical interferometer in order to achieve digital Full-caliber calibration of laser spherical interferometer. It is recommended to choose the spherical mirror with the closest F number (slightly smaller) to be calibrated digital laser spherical interferometer the F-number of the measured spherical element, and the length of the optical cavity should be as short as possible to improve the measurement repeatability.
4 Overview
The digital laser spherical interferometer is mainly used for the measurement of the surface deviation of spherical optical elements.
The digital laser spherical interferometer generates reference light and test light through its spherical lens, and the test light is incident on the ball under test the surface of the surface element is reflected back, and the light wave carrying the deviation of the surface shape of the measured spherical element forms an interference strip with the reference light
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 13 pages — is available in the English PDF.
How to Download JJF 1739-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1739-2019
$365.00