Valid

JJF 1736-2018Program of Pattern Evaluation of Total Suspended Particulates Samplers (English PDF)

总悬浮颗粒物采样器型式评价大纲

Preview PDF

This is a limited preview

Buy now to download the full PDF (23 pages)

Need quotation for your management?

Get a formal quotation for JJF 1736-2018 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2018

Implementation date

March 25, 2019

Scope

JJF 1736-2018 is the English-translated version of 总悬浮颗粒物采样器型式评价大纲.

JJF 1736-2018 is the Chinese standard "Program of Pattern Evaluation of Total Suspended Particulates Samplers".

Found what you need?

Document preview — JJF 1736-2018

National Standard of the People's Republic of China

ICS
17.020

Contents

  • Introduction (III)
  • 1 Scope (1)
  • 2 References (1)
  • 3 Overview (1)
  • 3.1 The working principle of the sampler (1)
  • 3.2 Structure of the sampler (1)
  • 4 Legal management requirements (3)
  • 4.1 Unit of measurement (3)
  • 4.2 Mark (3)
  • 5 Measurement requirements (3)
  • 5.1 Flow indication error (3)
  • 5.2 Flow repeatability (3)
  • 5.3 Flow stability (3)
  • 5.4 Timing error (3)
  • 5.5 Temperature indication error (3)
  • 5.6 Atmospheric pressure indication error (3)
  • 5.7 Inlet size deviation (3)
  • 5.8 Load capacity (3)
  • 6 General technical requirements (3)
  • 6.1 Appearance (3)
  • 6.2 Adaptability of power supply voltage (3)
  • 6.3 High temperature working test (4)
  • 6.4 Low temperature working test (4)
  • 6.5 Constant damp heat test (4)
  • 7 Type evaluation project table (4)
  • 8 Provide the number of prototypes and how to use them (5)
  • 8.1 Number of prototypes provided (5)
  • 8.2 How to use the prototype (5)
  • 9 Test methods and conditions of test items, data processing and qualification criteria (5)
  • 9.1 Flow indication error (5)
  • 9.2 Flow repeatability (6)
  • 9.3 Flow stability (6)
  • 9.4 Timing error (7)
  • 9.5 Temperature indication error (7)
  • 9.6 Atmospheric pressure indication error (8)
  • 9.7 Inlet size deviation (8)
  • 9.8 Load capacity (9)
  • 10 General technical requirements (9)
  • 10.1 Appearance (9)
  • 10.2 Adaptability of power supply voltage (10)
  • 10.3 High temperature working test (10)
  • 10.4 Low temperature working test (11)
  • 10.5 Constant Damp Heat Test (11)
  • 11 Table of measuring instruments and equipment used in the test project (12)
  • 12 Type evaluation original record format (12)
  • Appendix A Type Evaluation Record Format (13)

1 Scope (1)

2 References (1)

3 Overview (1)

3.1 The working principle of the sampler (1)

3.2 Structure of the sampler (1)

4 Legal management requirements (3)

4.1 Unit of measurement (3)

4.2 Mark (3)

5 Measurement requirements (3)

5.1 Flow indication error (3)

5.2 Flow repeatability (3)

5.3 Flow stability (3)

5.4 Timing error (3)

5.5 Temperature indication error (3)

5.6 Atmospheric pressure indication error (3)

5.7 Inlet size deviation (3)

5.8 Load capacity (3)

6 General technical requirements (3)

6.1 Appearance (3)

6.2 Adaptability of power supply voltage (3)

6.3 High temperature working test (4)

6.4 Low temperature working test (4)

6.5 Constant damp heat test (4)

7 Type evaluation project table (4)

8 Provide the number of prototypes and how to use them (5)

8.1 Number of prototypes provided (5)

8.2 How to use the prototype (5)

9 Test methods and conditions of test items, data processing and qualification criteria (5)

9.1 Flow indication error (5)

9.2 Flow repeatability (6)

9.3 Flow stability (6)

9.4 Timing error (7)

9.5 Temperature indication error (7)

9.6 Atmospheric pressure indication error (8)

9.7 Inlet size deviation (8)

9.8 Load capacity (9)

10 General technical requirements (9)

10.1 Appearance (9)

10.2 Adaptability of power supply voltage (10)

10.3 High temperature working test (10)

10.4 Low temperature working test (11)

10.5 Constant Damp Heat Test (11)

11 Table of measuring instruments and equipment used in the test project (12)

12 Type evaluation original record format (12)

Appendix A Type Evaluation Record Format (13)

Introduction

This type evaluation outline is the technical specification for type evaluation of the total suspended particulate sampler, referring to JJG943-2011 "Verification Regulations of Total Suspended Particulate Sampler", based on JJF 1015-2014 "General Evaluation of Measuring Instrument Type "Code" and "JJF 1016-2014" Guidelines for the Compilation of Type Appraisal Guidelines for Measuring Instruments "were prepared.

This type evaluation outline is released for the first time.

Outline of Type Evaluation of Total Suspended Particulate Sampler

1 Scope

This type of evaluation outline is applicable to the total suspended particulate sampler with classification code 46280000 (hereinafter referred to as sampling Device), including large flow (operating point flow is 1.05m3/min) and medium flow (working point flow is 100L/min) Type evaluation of class samplers.

Samplers using other flow points can be implemented by reference.

2 Reference documents this specification refers to the following documents.

JJG943-2011 Verification Regulation of Total Suspended Particulate Sampler GB/T 11606-2007 Environmental testing methods of analytical instruments HJ/T 368-2007 Technical requirements for environmental protection products Calibrate the orifice for the total suspended particulate sampler Flowmeter HJ/T 374-2007 Technical requirements and detection methods of total suspended particulate sampler for dated reference documents, only the dated version applies to this outline; for those without date references the latest version (including all amendments) is applicable to this outline.

3 Overview

3.1 The working principle of the sampler A certain volume of air is passed through the sampler cutting head at a constant speed through the filter membrane of known mass, and the particles suspended in the air the object is retained on the filter membrane, and the total suspended particles in the air are determined according to the increased mass of the filter membrane and the volume of air passing through the filter membrane the concentration of particulate matter.

3.2 Structure of the sampler the key components are sampling head, filter material sampling clamp, exhaust power device, flow sensor, temperature sensor and Time controller and other components.

3.2.1 Large flow sampler

3.2.1.1 The dimensions of the high-flow sampler are shown in Figure 1.

3.2.1.2 The width of the sampling port of the large-flow sampler is required to be (4 ± 0.1) cm, the direction of the sampling port is downward, Evenly distributed around the main body.

3.2.1.3 The high-flow sampler should have good sealing performance, and the frame where the filter membrane clip is placed should be flat and no air leakage.

There should be fastening devices between the top cover and the main body. The filter holder should be attached with a protective cover to protect the filter. Each sampler should provide two Set of filter clips.

3.2.2 Medium flow sampler

3.2.2.1 The sampling port of the medium flow sampler is oriented downwards and distributed evenly around the main body of the sampler.

The sampling head size is shown in Figure 2.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.

How to Download JJF 1736-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
23 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1736-2018

$500.00