Valid

JJF 1701.5-2019Program of Pattern Evaluation of Instrument Transformers--Part 5: Capacitor Voltage Transformers (English PDF)

测量用互感器型式评价大纲 第5部分:电容式电压互感器

Preview PDF

This is a limited preview

Buy now to download the full PDF (33 pages)

Need quotation for your management?

Get a formal quotation for JJF 1701.5-2019 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2019

Implementation date

March 31, 2020

Scope

JJF 1701.5-2019 is the English-translated version of 测量用互感器型式评价大纲 第5部分:电容式电压互感器.

JJF 1701.5-2019 is the Chinese standard "Program of Pattern Evaluation of Instrument Transformers--Part 5: Capacitor Voltage Transformers".

Found what you need?

Document preview — JJF 1701.5-2019

National Standard of the People's Republic of China

ICS
17.220

Contents

  • Introduction (III)
  • 1 Scope (1)
  • 2 References (1)
  • 3 Terminology (1)
  • 3.1 Routine test (1)
  • 4 Overview (1)
  • 5 Legal management requirements (2)
  • 5.1 Unit of measurement (2)
  • 5.2 External structure (2)
  • 5.3 Logo (2)
  • 5.4 Submitted technical materials (3)
  • 6 Measurement requirements (3)
  • 6.1 Accuracy level (3)
  • 6.2 Measurement interval (3)
  • 6.3 Winding polarity (3)
  • 6.4 Error limits (3)
  • 7 General technical requirements (4)
  • 7.1 Operating environmental conditions (4)
  • 7.2 Appearance and structure (4)
  • 7.3 Technical requirements (4)
  • 8 List of Type Evaluation Items (8)
  • 9 Provide the number of prototypes and how to use them (10)
  • 9.1 General requirements (10)
  • 9.2 Number of prototypes provided (10)
  • 9.3 How to use the prototype (10)
  • 10 Test methods and conditions of test items, data processing and qualification criteria (10)
  • 10.1 General test conditions (10)
  • 10.2 Accuracy test (initial test) (11)
  • 10.3 Temperature rise test (12)
  • 10.4 Capacitance and dielectric loss factor measurement (initial test) (15)
  • 10.5 Electromagnetic Compatibility (EMC) Test-Radio Interference Voltage (RIV) Test (16)
  • 10.6 Truncated lightning impulse test (17)
  • 10.7 Primary end impact pressure test (18)
  • 10.8 Wet test of outdoor type transformer (19)
  • 10.9 Ferromagnetic resonance test (21)
  • 10.10 Short circuit withstand capability test (22)
  • 10.11 Accuracy test (22)
  • 10.12 Inspection of enclosure protection level (23)
  • 10.13 Sealing performance test at ambient temperature-sealing performance test of capacitor divider (25)
  • 10.14 Capacitance and dielectric loss factor measurement (retest) (25)
  • 10.15 Primary-end power frequency withstand voltage test-power frequency withstand voltage test for capacitor voltage divider (26)
  • 10.16 Partial discharge measurement (27)
  • 10.17 Capacitance and dielectric loss factor measurement (final measurement) (28)
  • 10.18 Inspection of signs (29)
  • 10.19 Primary power frequency withstand voltage test-power frequency withstand voltage test of electromagnetic unit (29)
  • 10.20 Secondary-end power frequency withstand voltage test (31)
  • 10.21 Ferromagnetic resonance inspection (31)
  • 10.22 Accuracy test (retest) (31)
  • 10.23 Sealing performance test at ambient temperature-electromagnetic unit sealing performance test (32)
  • 10.24 Insulation oil performance test of electromagnetic unit (32)
  • 11 Table of measuring instruments and equipment used in the test project (34)
  • Appendix A Type Evaluation Record Format (35)
  • Appendix B Type Evaluation Report Format (37)
  • Appendix C Format of "Description" for Type Evaluation Preservation Prototype (43)

1 Scope (1)

2 References (1)

3 Terminology (1)

3.1 Routine test (1)

4 Overview (1)

5 Legal management requirements (2)

5.1 Unit of measurement (2)

5.2 External structure (2)

5.3 Logo (2)

5.4 Submitted technical materials (3)

6 Measurement requirements (3)

6.1 Accuracy level (3)

6.2 Measurement interval (3)

6.3 Winding polarity (3)

6.4 Error limits (3)

7 General technical requirements (4)

7.1 Operating environmental conditions (4)

7.2 Appearance and structure (4)

7.3 Technical requirements (4)

8 List of Type Evaluation Items (8)

9 Provide the number of prototypes and how to use them (10)

9.1 General requirements (10)

9.2 Number of prototypes provided (10)

9.3 How to use the prototype (10)

10 Test methods and conditions of test items, data processing and qualification criteria (10)

10.1 General test conditions (10)

10.2 Accuracy test (initial test) (11)

10.3 Temperature rise test (12)

10.4 Capacitance and dielectric loss factor measurement (initial test) (15)

10.5 Electromagnetic Compatibility (EMC) Test-Radio Interference Voltage (RIV) Test (16)

10.6 Truncated lightning impulse test (17)

10.7 Primary end impact pressure test (18)

10.8 Wet test of outdoor type transformer (19)

10.9 Ferromagnetic resonance test (21)

10.10 Short circuit withstand capability test (22)

10.11 Accuracy test (22)

10.12 Inspection of enclosure protection level (23)

10.13 Sealing performance test at ambient temperature-sealing performance test of capacitor divider (25)

10.14 Capacitance and dielectric loss factor measurement (retest) (25)

10.15 Primary-end power frequency withstand voltage test-power frequency withstand voltage test for capacitor voltage divider (26)

10.16 Partial discharge measurement (27)

10.17 Capacitance and dielectric loss factor measurement (final measurement) (28)

10.18 Inspection of signs (29)

10.19 Primary power frequency withstand voltage test-power frequency withstand voltage test of electromagnetic unit (29)

10.20 Secondary-end power frequency withstand voltage test (31)

10.21 Ferromagnetic resonance inspection (31)

10.22 Accuracy test (retest) (31)

10.23 Sealing performance test at ambient temperature-electromagnetic unit sealing performance test (32)

10.24 Insulation oil performance test of electromagnetic unit (32)

11 Table of measuring instruments and equipment used in the test project (34)

Appendix A Type Evaluation Record Format (35)

Appendix B Type Evaluation Report Format (37)

Appendix C Format of "Description" for Type Evaluation Preservation Prototype (43)

Introduction

This outline is based on JJF 1016-2014 "Guidelines for the Compilation of Outlines for Evaluation of Measuring Instruments" Compiled with "General Specification for Type Evaluation of Measuring Instruments".

This outline is published for the first time.

Outline of type evaluation for measuring transformer Part 5: Capacitive voltage transformer

1 Scope

This outline is applicable to the type evaluation of measuring voltage transformers with classification code 15281000 for measuring instruments.

This outline is applicable to capacitors used for power supply gas measurement, with a frequency of 50 Hz and a rated secondary voltage of 100/3V Type voltage transformer.

2 Reference documents the outline cited the following documents.

JJG314 measuring voltage transformer GB/T 156 standard voltage GB/T 311.1 Insulation coordination Part 1: Definitions, principles and rules GB/T 4208 enclosure protection level (IP code) GB/T 5585.1 Copper, aluminum and its alloy busbars for electrical purposes Part 1: Copper and copper alloy busbars GB/T 11604 High-voltage electrical equipment radio interference test method GB/T 16927.1 High voltage test technology Part 1: General definition and test requirements GB/T 16927.2 High voltage test technology Part 2: Measurement system GB/T.20138 Protection level of electrical equipment shell against external mechanical collision (IK code) GB/T 20840.1-2010 Transformers Part 1: General technical requirements GB/T 20840.5-2013 Transformers Part 5: Supplementary requirements for capacitive voltage transformers GB/Z 24841-2018 Technical Specification for Capacitive Voltage Transformer for 1000kV AC System for dated reference documents, only the dated version applies to this specification; for those without date references the latest version (including all amendments) is applicable to this specification.

3 Terminology

The terms used in the documents cited in this outline and the following terms apply to this outline.

3.1 routine test in order to reflect the manufacturing defects, each equipment is subjected to tests that do not damage the product's characteristics and reliability.

Rely on sex.

4 Overview

Capacitive voltage transformer is a special voltage transformer based on capacitive voltage divider, using capacitive voltage divider the high voltage is reduced to an intermediate voltage, and then the electromagnetic unit is converted into a low voltage according to the proportional requirements, which is used for voltage monitoring and electrical can be measured.

The capacitive voltage transformer is mainly composed of a capacitive voltage divider and an electromagnetic unit. The electromagnetic unit consists of an intermediate voltage

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.

How to Download JJF 1701.5-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
33 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1701.5-2019

$800.00