JJF 1427-2013Calibration Specification for MEMS Linear Accelerometers (English PDF)
微机电(MEMS)线加速度计校准规范
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JJF 1427-2013 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
September 2, 2013
Implementation date
December 2, 2013
Scope
JJF 1427-2013 is the English-translated version of 微机电(MEMS)线加速度计校准规范.
JJF 1427-2013 is the Chinese standard "Calibration Specification for MEMS Linear Accelerometers". Issued on 2013-09-02, in force from 2013-12-02.
Found what you need?
Document preview — JJF 1427-2013
National Standard of the People's Republic of China
- ICS
- 17.080
Contents
- Introduction (II)
- 1 Scope (1)
- 2. References (1)
- 3 Terms and definitions (1)
- 4 Overview (1)
- 5 Metrological characteristics (2)
- 6 Calibration conditions (3)
- 6.1 Calibration environmental conditions (3)
- 6.2 Standards and measuring equipment (3)
- 7 Calibration items and calibration methods (4)
- 7.1 Calibration items (4)
- 7.2 Calibration method (5)
- 8 Calibration results expression (14)
- 9 Recalibration interval (14)
- Appendix A MEMS linear accelerometer calibration uncertainty assessment of the gravity field sample (15)
- Appendix B Calibration Certificate-page format (21)
1 Scope (1)
2 References (1)
3 Terms and definitions (1)
4 Overview (1)
5 Metrological characteristics (2)
6 Calibration conditions (3)
6.1 Calibration environmental conditions (3)
6.2 Standards and measuring equipment (3)
7 Calibration items and calibration methods (4)
7.1 Calibration items (4)
7.2 Calibration method (5)
8 Calibration results expression (14)
9 Recalibration interval (14)
Appendix A MEMS linear accelerometer calibration uncertainty assessment of the gravity field sample (15)
Appendix B Calibration Certificate-page format (21)
Introduction
Micro-electromechanical (MEMS) linear accelerometers are widely used in various fields of national economy, based on this consideration, combined with computer Electric (MEMS) accelerometer calibration line of the actual situation, the reference to the International Electrotechnical Commission IEC (INTERNATIONAL ELECTROTECHNICALCOMMISSION) 60747-14-4Ed.1 written/CDVIEC Semiconductor Accelerometer (SEMICONDUCTORDEVICES-Part 14-4. Semiconductoraccelerometers) Preparation of this specification.
Microelectromechanical (MEMS) accelerometer calibration line specification
1 Scope
This specification defines the micro-electromechanical (MEMS) linear accelerometer (hereinafter referred to as MEMS linear accelerometer or acceleration Meter) calibration program and calibration methods for single sensitive axis MEMS linear accelerometer.
2. References
This specification refers to the following documents.
JJF 1116-2004 linear accelerometer calibration precision centrifuge specifications GJB1037A-2004 single-axis accelerometer tilting servo line test method GB/T 20485.21-2007 vibration and shock sensor calibration method Part 21. Vibration Comparative Law calibration IEC 60747Part 14-4 semiconductor accelerometer (14-4. Semiconductoraccelerometers) for dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.
3 Terms and definitions 3.1 micro-electromechanical MicroElectroMechanicalSystem, MEMS the use of semiconductor technology systems with integrated sensors, actuators, and/or circuits.
3.2 MEMS linear accelerometer MEMSlinearaccelerometers Using the MEMS fabrication processing for converting the input line is proportional to the acceleration converted to an output (usually the quantity of electricity) sensors.
3.3 sensitive quality proofmass Line accelerometers along or around the axis of the acceleration input is converted to torque (or force) the effective mass.
4 Overview
MEMS linear accelerometer sensitive by the general quality, flexible support and switching circuits, and the like; works of Min A certain sense of mass displacement in the inertia force generated by the external acceleration, the displacement associated with the input acceleration, which Physical model by equation (1) can be simplified.
dt2 D
dt Kx C = -Ma
Where.
M --- sensitive quality, kg;
The D --- damping provided by the surrounding gas, N · s/m;
K --- spring rate, N/m;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
How to Download JJF 1427-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1427-2013
$375.00