Valid

JJF 1413-2013Program of Pattern Evaluation of Tyre Pressure Gauges (English PDF)

轮胎压力表型式评价大纲

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for JJF 1413-2013 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Mandatory

Issue date

June 27, 2013

Implementation date

September 27, 2013

Scope

JJF 1413-2013 is the English-translated version of 轮胎压力表型式评价大纲.

JJF 1413-2013 is the Chinese standard "Program of Pattern Evaluation of Tyre Pressure Gauges". Issued on 2013-06-27, in force from 2013-09-27.

Found what you need?

Document preview — JJF 1413-2013

National Standard of the People's Republic of China

ICS
17.100

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2. References (1)
  • 3 Overview (1)
  • 4 Legal management requirements (1)
  • 4.1 Units of measurement (1)
  • 4.2 Accuracy class (1)
  • 4.3 Legal metrology marking and identification of measuring instruments (1)
  • 4.4 Installation flag (2)
  • 4.5 Experimental Prototype (2)
  • 4.6 Technical Information (2)
  • 5 Measurement requirements (2)
  • 5.1 Measurement limit and accuracy class (2)
  • 5.2 The maximum permissible error (3)
  • 5.3 Changes indication (3)
  • 5.4 Indicates the status (3)

1 Scope (1)

2 References (1)

3 Overview (1)

4 Legal management requirements (1)

4.1 Units of measurement (1)

4.2 Accuracy class (1)

4.3 Legal metrology marking and identification of measuring instruments (1)

4.4 Installation flag (2)

4.5 Experimental Prototype (2)

4.6 Technical Information (2)

5 Measurement requirements (2)

5.1 Measurement limit and accuracy class (2)

5.2 The maximum permissible error (3)

5.3 Changes indication (3)

5.4 Indicates the status (3)

Tightness 5.5 (3)

5.6 Reset to zero mechanism (3)

5.7 Overload (3)

6 General Requirements (3)

6.1 Appearance (3)

6.2 Paint and coating (4)

Temperature-resistant 6.3 (4)

6.4 Effect of temperature (4)

6.5 Resistant to temperature and humidity cycling (4)

6.6 Vibration resistance (4)

Durability 6.7 (4)

6.8 Resistance to salt spray (4)

6.9 Dust (4)

7 Type evaluation item list (5)

8 Pilot projects test methods and conditions (5)

8.1 Test Conditions (5)

8.2 Type evaluation method (6)

9 Type, Judgment principle results (11)

Appendix A tire pressure gauge type evaluation original record format (12)

Introduction

JJF 1002-2010 "national verification procedures write rules", JJF 1001 "common measurement terms and definitions" and JJF 1059 "Evaluation and Expression of Uncertainty in Measurement" together constitute the basic outline of the development of the series specifications.

This syllabus according to JJG927-2013 "tire pressure gauge" and QC/T 14-2009 "automotive wheel Tire barometer "of content requires compiled, it is possible to gauge the performance of the tire to make an objective, comprehensive and effective Evaluation.

The outline of the structure in accordance with JJF 1016-2009 "appliance type evaluation outline guidelines for the preparation of measurement" orchestrated each chapter in accordance with JJF 1015-2002 "Measuring Instruments type evaluation and type approval of universal norms" and JJF 1002-2010 provisions "national verification procedures write rules" were prepared.

Tire pressure gauge type evaluation outline

1 Scope

This outline is suitable for measuring a maximum of 0.6MPa ~ 2.5MPa, for measuring tire pressure gauge pointer and Pressure gauge (hereinafter referred to as gauge) for type approval.

2. References

This outline cited the following documents.

JJG927-2013 tire pressure gauge GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka.

Salt

GB 4208-2008 shell protection (IP code) QC/T 14-2009 automotive tire gauges QC/T 727-2007 automobile, motorcycle instrument for dated references, only the dated edition applies to this outline; undated reference documents Member, the latest edition (including any amendments) applies to this outline.

3 Overview

Pressure gauge for measuring vehicle tire inflation pressure.

In accordance with its pressure gauge structural principle it can be divided into two types. one gauge pointer; the second is the scale pressure gauge.

Analog pressure gauge works as follows. the elastic sensing element within the gauge under pressure generated by elastic deformation Change, through mechanical transmission zoom mechanism, promote the pointer on the indexing plate indicates the pressure value. Scale pressure gauge work Principle. generating moving plunger with a ruler under pressure, and stabilize at a certain position, this time scale it may indicate pressure value. Both types have a tire pressure gauge with gas nozzle head valve connection.

4 legal management requirements 4.1 units of measurement Unit of measurement gauge is Pa (Pascal), or its decimal multiples units. kPa and MPa.

4.2 accuracy class

Pressure gauge accuracy class selected from the following sequences. 1,1.6,2.5,4 and meet JJG927-2013 requirements.

4.3 legal metrology marking and measuring instruments logo it must be marked with signs and legal metrology measuring instruments logo and other significant parts of the gauge plate or panel, its logo and labeling must be clear, solid and reliable.

4.3.1 legal metrology mark

--- Measurement equipment manufacturing license logo and number (test prototype should stay out of the corresponding position);

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

How to Download JJF 1413-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1413-2013

$375.00