Valid

JJF 1405-2013Program of Pattern Evaluation of Total Organic Carbon Analyzers (English PDF)

总有机碳分析仪型式评价大纲

Preview PDF

This is a limited preview

Buy now to download the full PDF (26 pages)

Need quotation for your management?

Get a formal quotation for JJF 1405-2013 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Mandatory

Issue date

April 27, 2013

Implementation date

July 27, 2013

Scope

JJF 1405-2013 is the English-translated version of 总有机碳分析仪型式评价大纲.

JJF 1405-2013 - The standard provides: Organic Carbon Analyzer product grouping, requirements, test methods, results processing and decision rules, applicable Laboratory TOC Analyzer type evaluation.

Found what you need?

Document preview — JJF 1405-2013

National Standard of the People's Republic of China

ICS
17.020

Contents

  • Introduction (III)
  • 1 Scope (1)
  • 2. References (1)
  • 3 Terms (1)

1 Scope (1)

2 References (1)

3 Terms (1)

Total carbon 3.1 (1)

3.2 Total Organic Carbon (1)

3.3 Total Inorganic Carbon (1)

4 Overview (1)

5 Legal management requirements (2)

5.1 Test Prototype (2)

5.2 Units of measurement requirements (2)

5.3 Accuracy requirements (2)

5.4 Legal metrology requirements for marking and identification of measuring instruments (2)

5.5 Installation marking requirements (2)

6 Measurement requirements (2)

6.1 TOC indication error (2)

6.2 Total inorganic carbon indication error (2)

6.3 TOC measurement repeatability (2)

6.4 Total inorganic carbon measurement repeatability (2)

7 General technical requirements (3)

7.1 Appearance requirements (3)

7.2 Insulation resistance (3)

7.3 Dielectric strength (3)

7.4 Adaptive power supply voltage (3)

7.5 High Temperature Test (3)

7.6 Low Temperature Test (3)

7.7 High temperature storage test (3)

7.8 Cryogenic storage test (3)

7.9 Damp heat test (3)

7.10 Crash Test (3)

7.11 Drop test (4)

8 Pattern evaluation item list (4)

Conditions and methods (5) 9 Type Evaluation

9.1 Preparation before the test (5)

9.2 Appearance (6)

9.3 Insulation resistance (6)

9.4 Dielectric strength (7)

9.5 TOC indication error test (7)

9.6 Total inorganic carbon measurement indication error test (8)

9.7 TOC measurement repeatability test (9)

9.8 Total inorganic carbon measurement repeatability test (10)

9.9 Adaptive voltage supply (10)

9.10 High Temperature Test (11)

9.11 Low temperature test (11)

9.12 High-temperature storage test (12)

9.13 Low temperature storage test (13)

9.14 Damp heat test (13)

9.15 Crash Test (14)

9.16 Drop test (15)

10 Determined the type of evaluation results (15)

Appendix A TOC analyzer type evaluation original records (16)

Preparation of standard solutions Appendix B (32)

Introduction

This type of evaluation based on the outline JJF 1016 "Measuring Instruments type evaluation outline guidelines for the preparation", JJF 1015 "count Evaluation of the amount of equipment type and type approval of universal norms "and JJF 1001" common measurement terms and definitions of "compilation.

The outline of the type evaluation technical indicators reference JJG821-2005 "Total Organic Carbon Analyzer", GB/T 11606-2007 "Environmental test methods for the analysis instrument", HJ/T 104-2003 "total organic carbon (TOC) of water quality automatic analyzer Technical requirements "and other technical regulations.

This type of evaluation outline for the first release.

Total Organic Carbon Analyzer Type Evaluation Outline

1 Scope

This type of evaluation outline provides for total organic carbon analyzer product groupings, requirements, test methods, and results processing Determine the rules for laboratory TOC analyzer type evaluation.

2. References

JJG821-2005 Total Organic Carbon Analyzer GB/T 11606-2007 analytical instruments environmental test methods HJ/T 104-2003 Total Organic Carbon (TOC) technical requirements for water quality automatic analyzer these documents contain provisions which through reference in this syllabus constitute provisions of this outline. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this outline, however, the drum Reed whether the latest versions of these files according to the parties that this outline agreement. Those who do not note cited date Use, the latest versions apply to this outline.

3 Terms

3.1 total carbon Total organic carbon and inorganic carbon in water and, referred to as TC.

3.2 TOC totalorganiccarbon Total organic carbon in water, referred to as TOC.

3.3 Total Inorganic Carbon Total inorganic carbon in water, referred to as TIC.

4 Overview

Total Organic Carbon Analyzer (hereinafter referred to as TOC analyzer) measuring principle according to which type of detector into presumptuous San infrared (NDIR) detection and conductivity detection method. NDIR detection method is divided into Subtraction and direct measurement law. Subtraction is the same test sample were twice injected into the reactor, one of which would have all the elements of carbon oxide Carbon dioxide, another one in which the inorganic carbon dioxide into oxygen, carbon dioxide measured by the difference between the two to get the total Organic carbon. Direct measurement test sample is first acidified, then ventilation blowing inorganic carbon in the sample, then the remaining the total carbon dioxide into oxygen, total organic carbon obtained by the NDIR detector, which is also known as non-organic purged Carbon (NPOC) measurement method. Conductivity detection method is by first measuring the total carbon sample conductivity value, then there is measured all organic carbon oxidation of the sample conductivity, total organic carbon in the sample is calculated by the difference between the two conductivity values.

TOC analyzer mainly use the following formula to calculate the total organic carbon content in the sample.

TOC = total carbon - Total Inorganic Carbon TOC analyzer main methods of oxidation combustion catalytic oxidation, wet oxidation, wet oxidation which way is adopted

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

How to Download JJF 1405-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
26 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1405-2013

$525.00