JJF 1404-2013Program of Pattern Evaluation of Air Samplers (English PDF)
大气采样器型式评价大纲
This is a limited preview
Buy now to download the full PDF (29 pages)
Need quotation for your management?
Get a formal quotation for JJF 1404-2013 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
April 27, 2013
Implementation date
July 27, 2013
Scope
JJF 1404-2013 is the English-translated version of 大气采样器型式评价大纲.
JJF 1404-2013 is the Chinese standard "Program of Pattern Evaluation of Air Samplers". Issued on 2013-04-27, in force from 2013-07-27.
Found what you need?
Document preview — JJF 1404-2013
National Standard of the People's Republic of China
- ICS
- 17.020
Contents
- Introduction (III)
- 1 Scope (1)
- 2. References (1)
- 3 Overview (1)
- 4 Legal management requirements (1)
1 Scope (1)
2 References (1)
3 Overview (1)
4 Legal management requirements (1)
Technical documentation and test prototype units 4.1 application should be submitted (1)
4.2 Units of measurement requirements (1)
4.3 The maximum permissible error requirements (2)
4.4 Legal metrology requirements for marking and identification of measuring instruments (2)
5 Metering performance requirements (2)
5.1 Flow indication error (2)
5.2 Rate Repeatability (2)
5.3 Flow stability (2)
Timing error 5.4 (2)
5.5 Temperature stability (2)
5.6 Temperature indication error (2)
6 General Requirements (2)
6.1 General inspection (2)
Seal Check 6.2 (2)
6.3 Insulation resistance check (2)
6.4 Dielectric Strength check (3)
6.5 Supply voltage suitability tests (3)
6.6 Samplers operating noise inspection (3)
6.7 Operating temperature test (3)
6.8 Storage temperature test (3)
6.9 Damp heat test (3)
6.10 Drop test (3)
6.11 Crash Test (3)
6.12 Insulation resistance check (after environmental testing) (3)
6.13 Dielectric Strength check (after environmental testing) (3)
7 Type Evaluation Project (3)
8 Pilot projects test methods and conditions (4)
8.1 Performance Measurement (4)
8.2 General Technical (9)
9 Deal with the type of evaluation results (16)
9.1 Determination principle (16)
10 Type evaluation record (16)
Appendix A air sampler type evaluation original record format (17)
Introduction
This type of evaluation based on the outline JJF 1016 "Measuring Instruments type evaluation outline guidelines for the preparation", JJF 1015 "count Evaluation of the amount of equipment type and type approval of universal norms "and JJF 1001" common measurement terms and definitions of "compilation.
The outline of the type evaluation technical indicators reference to GB/T 17061-1997 "workplace air sampling equipment Technical Specifications ", HJ/T 375-2007" ambient air sampler technical requirements and test methods ", HJ/T 376-2007 "24 thermostatic automatic continuous ambient air sampler technical requirements and test methods", JJG956-2013 "big Air sampler ", GB/T 11606-2007" analytical instruments environmental test method "and other technical regulations.
This type of evaluation outline for the first release.
Air sampler type evaluation outline
1 Scope
This type of evaluation framework applicable to air sampler (hereinafter referred to as sampling) the type evaluation.
2. References
JJG956-2013 air sampler GB/T 11606-2007 analytical instruments environmental test methods GB/T 17061-1997 workplace air sampling equipment specifications HJ/T 375-2007 ambient air sampler technical requirements and test methods HJ/T 376-2007 24 Xiaoshi thermostatic automatic continuous ambient air sampler technical requirements and test methods these documents contain provisions which through reference in this syllabus constitute provisions of this outline. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this syllabus, however, the drum Reed whether the latest versions of these files according to the parties that this outline agreement. Those who do not note cited date Use, the latest versions apply to this outline.
3 Overview
Sampling is an acquisition instrument atmospheric gaseous or vapor samples, which works with a sample pump, through the steady flow through different measures and timing synchronization method, achieve the quantitative collection. According to the instrument to withstand the load capacity, the instrument Divided into Class A (bearer 0.5kPa) and Class B (bearer 4.5kPa).
The sampler consists of three parts collector flow system and pump power systems. Collectors into the absorption tube, filter Sampling clip, solid particle sampling tube for collecting a small amount of gaseous pollutants mining trachea, syringes, vacuum bottles.
Flow measurement systems typically employ a gas flow rotameter, flow regulating assembly also means, and a timing control means Temperature control devices. Suction power system is actually a vacuum pumping system, usually by an electric vacuum pump, scraper Pump, membrane pump, electromagnetic pump or other suction pump and other components.
4 legal management requirements 4.1 technical documents applicant shall submit the information and test prototype
4.1.1 Technical documents
4.1.1.1 Prototype Photos 4.1.1.2 product standards (including test methods) 4.1.1.3 assembly diagram, schematic diagram and major components
4.1.1.4 Instructions 4.1.1.5 proof certificate (only for explosion-proof sampling requirements)
4.1.1.6 Development Unit test report done
4.1.2 Test Prototype
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.
How to Download JJF 1404-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1404-2013
$500.00