Valid

JJF 1402-2013Calibration Specification for Biological Microscopes (English PDF)

生物显微镜校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for JJF 1402-2013 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Mandatory

Issue date

April 27, 2013

Implementation date

July 27, 2013

Scope

JJF 1402-2013 is the English-translated version of 生物显微镜校准规范.

JJF 1402-2013 - This standard applies to: Biological microscope calibration.

Found what you need?

Document preview — JJF 1402-2013

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2. References (1)
  • 3 Overview (1)
  • 4 Metrological characteristics (2)
  • 4.1 Microscope objective magnification error (2)
  • 4.2 Binocular microscope system magnification difference of about two (2)
  • 4.3 Binocular microscope field of view around the center of the deviation (2)
  • 4.4 Indication error (2)

1 Scope (1)

2 References (1)

3 Overview (1)

4 Metrological characteristics (2)

4.1 Microscope objective magnification error (2)

4.2 Binocular microscope system magnification difference of about two (2)

4.3 Binocular microscope field of view around the center of the deviation (2)

4.4 Indication error (2)

Calibration Condition 5 (2)

5.1 Environmental conditions (2)

5.2 Calibration with standard equipment and the appropriate equipment (2)

6 Calibration items and calibration methods (2)

6.1 Calibration items (2)

6.2 Calibration method (3)

7 Calibration Results The expression (4)

8 Recalibration interval (5)

Appendix A Error in Measurement Uncertainty Evaluation (6)

Appendix B microscope objective magnification error measuring results Evaluation of Uncertainty (8)

Appendix C calibration certificate content and in-page format (10)

Introduction

JJF 1402-2013 "biological microscope calibration specification" (hereinafter referred to as "the Rules") for biological microscopes Calibration measurement established technical specifications. Preparation of this specification to JJF 1071-2010 "national measurement calibration specifications prepared by Regulation Then ", JJF 1001-2011" common measurement terms and definitions "and JJF 1059.1-2012" Measurement Uncertainty assessment and given that "as the basis and foundation. This specification is the main reference standard GB/T 2985-2008 "biological microscope." this specification is the first release.

Biological microscope calibration specifications

1 Scope

This standard applies to biological microscope calibration.

2. References

This specification references the following documents.

GB/T 2985-2008 Microscope for dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 Overview

Microscope (hereinafter referred to as the "microscope") is an observation and measurement of biological chips, biological cells, bacteria Measuring the size of the structure, as well as for the living tissue culture, liquid precipitation amount, powder and fine particles size and other parameters the amount of the instrument. Mainly by the eyepiece, an objective lens, a stage and a mirror (or built-in light and a condenser lens), etc., have Microscope with an illumination portion (condenser), replace the role of the reflector.

When used, the object to be measured on the microscope stage, adjust the position of the stage by focusing hand wheel, make things Body microscope eyepiece reticle into a clear image, in order to observe and measure.

Structured into microscope monocular microscope and binocular microscope use is divided into universal microscope, laboratory and research Study with a microscope. Specific structure shown in Figure 1, Figure 2.

Figure 1 monocular microscope structure Figure 2 binocular microscope Chart

1- eyepiece; 2- eyepiece; 3- nosepiece and the objective lens; 4- stage;

5- lighting or mirror; 6- focusing hand wheel 1- eyepiece; 2- eyepiece; 3- nosepiece and the objective lens; 4- stage;

5- lighting or mirror; 6- move the stage button; 7- focusing hand wheel

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

How to Download JJF 1402-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
11 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1402-2013

$255.00