Valid

JJF 1398-2013Examination Specification for China Metrology Certification. Fuel Dispensers (English PDF)

燃油加油机制造计量器具许可 考核必备条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for JJF 1398-2013 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine

Level / Type

National · Mandatory

Issue date

February 16, 2013

Implementation date

August 16, 2013

Scope

JJF 1398-2013 is the English-translated version of 燃油加油机制造计量器具许可 考核必备条件.

JJF 1398-2013 is the Chinese standard "Examination Specification for China Metrology Certification. Fuel Dispensers". Issued on 2013-02-16, in force from 2013-08-16.

Found what you need?

Document preview — JJF 1398-2013

National Standard of the People's Republic of China

ICS
17.120

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2. References (1)
  • 3 Production facilities (1)
  • 3.1 Production equipment (1)
  • 3.2 Technology and equipment and molds (2)
  • 3.3 Testing equipment (2)
  • 4 Fuel tanker factory inspection requirements (3)
  • 4.1 Test site and environmental conditions (3)
  • 4.2 Factory inspection staff (3)
  • 4.3 Test basis (3)
  • 4.4 Machine testing equipment (4)
  • 5 Technical staff (4)

1 Scope (1)

2 References (1)

3 Production facilities (1)

3.1 Production equipment (1)

3.2 Technology and equipment and molds (2)

3.3 Testing equipment (2)

4 Fuel tanker factory inspection requirements (3)

4.1 Test site and environmental conditions (3)

4.2 Factory inspection staff (3)

4.3 Test basis (3)

4.4 Machine testing equipment (4)

5 Technical staff (4)

Safety Requirements 6 (4)

7 Other requirements (5)

7.1 Production sites (5)

7.2 Plant ownership and use (5)

7.3 Subcontractor Requirements (5)

7.4 Measuring and testing equipment management (5)

Appendix A assessment record sheet (6)

Introduction

In order to regulate the fuel tanker measurement equipment manufacturing license assessment work to ensure that the assessment work of scientific, objective, public Flat, impartiality and effectiveness, according to "manufacture and repair of measuring instruments license supervision and management measures" and "new production of measuring instruments Product management approach "and other measurement regulations, the development of the assessment specification.

In the present specification JJG443 "fuel tanker", GB/T 9081 "motor vehicle fuel tanker" as the technical basis for system Set is a supplement to JJF 1246-2010 "measurement equipment manufacturing license examination universal norms" on the contents.

"Fuel tanker measurement equipment manufacturing license examination Prerequisites" of previously issued as follows.

The assessment specification instead of JJF 1061-1999 "Fuel Dispensers manufacturing license assessment norms." Fuel tanker measurement equipment manufacturing license Examination Prerequisites

1 Scope

This instruction applies to fuel tanker manufacturer of measurement equipment manufacturing license necessary production conditions assessment, effective Review and daily supervision and inspection after the expiration of the period.

2. References

This specification refers to the following documents.

JJG443 fuel tanker

GB/T 9081 motor vehicle fuel tanker Note. For dated references, only the dated edition applies to this specification; undated reference documents, the most the new version (including any amendments) applies to this specification.

3 production facilities Production facilities include production requirements of equipment, process equipment and tooling and testing equipment three parts.

3.1 Production Equipment the type of equipment used in the production, quantity, performance and production should adapt, the company born of the enterprise in accordance with Production methods with production equipment. Production equipment should be in good condition and stable performance. The key parts all or part of their own students Production and processing enterprises, listed in Table 1 should be equipped with the appropriate equipment.

Table 1 key components and production equipment

No. Name key components related equipment device uses Remarks 1 chassis and piping Chassis and pipeline processing equipment Chassis and pipeline processing such as bending machines, shears, Presses, punching, bending machine, Welding equipment

2 Flow Transmitters

Flow Measurement Converter Manufacturing Equipment Flow Measurement Converter manufacture such as machine tools (lathes, Drilling, tapping) or implement More functional processing center, and grinding equipment, pressure mounted Equipment, etc.

3 pumps (including oil and gas separation) Pumps (including oil and gas separation) Manufacturing Equipment Pumps (including oil and gas separation) manufacture such as machine tools (lathes, Milling, drilling) or to achieve Machining center functions to and tapping machines, pressure mounted equipment, Cylindrical grinder, etc.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

How to Download JJF 1398-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1398-2013

$195.00