JJF 1380-2012Program of Pattern Evaluation of Capacitive and Resistive Grain Moisture Testers (English PDF)
电容法和电阻法谷物水分测定仪型式评价大纲
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for JJF 1380-2012 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Mandatory
Issue date
December 21, 2012
Implementation date
March 21, 2013
Scope
JJF 1380-2012 is the English-translated version of 电容法和电阻法谷物水分测定仪型式评价大纲.
JJF 1380-2012 is the Chinese standard "Program of Pattern Evaluation of Capacitive and Resistive Grain Moisture Testers". Issued on 2012-12-21, in force from 2013-03-21.
Found what you need?
Document preview — JJF 1380-2012
Contents
- Introduction (II)
- 1 Scope (1)
- 2. References (1)
- 3 Terms (1)
- 3.1 Grain Moisture (1)
- 4 Overview (1)
- 5 Provides a review of technical information and test prototype (1)
- 5.1 Technical Information (1)
- 5.2 Test Prototype (2)
- 6 Legal management requirements (2)
- 6.1 Units of measurement (2)
- 6.2 Accuracy class (2)
- 6.3 Legal metrology marking and identification of measuring instruments (2)
- 7 Metrological requirements (2)
- 7.1 Scope and instrument moisture measurement range (2)
- 7.2 Indication error and repeatability (3)
- 7.3 Adaptive power supply voltage (3)
- 8 General technical requirements (3)
- 8.1 Appearance and other requirements (3)
1 Scope (1)
2 References (1)
3 Terms (1)
3.1 Grain Moisture (1)
4 Overview (1)
5 Provides a review of technical information and test prototype (1)
5.1 Technical Information (1)
5.2 Test Prototype (2)
6 Legal management requirements (2)
6.1 Units of measurement (2)
6.2 Accuracy class (2)
6.3 Legal metrology marking and identification of measuring instruments (2)
7 Metrological requirements (2)
7.1 Scope and instrument moisture measurement range (2)
7.2 Indication error and repeatability (3)
7.3 Adaptive power supply voltage (3)
8 General technical requirements (3)
8.1 Appearance and other requirements (3)
Safety 8.2 (4)
8.3 Environmental adaptability (4)
8.4 Transport storage properties (4)
9 Type evaluation of the project (5)
10 Test conditions and methods (6)
10.1 Test environment condition (6)
10.2 Metrological requirements (6)
10.3 General Requirements (8)
11 Processing, types of evaluation results (10)
11.1 Determination principle (10)
11.2 Type Evaluation Report (10)
A determination of moisture content of grain samples appendix (11) Preparation Method B Grain moisture content of the sample appendix (14) Appendix C capacitance method and the resistance method grain moisture meter original record format (16)
Introduction
This type of evaluation outline technical requirements for instrument supply voltage adaptability, security, performance and testing projects Methods GB/T 19878-2005 "capacitance method and the resistance method grain moisture tester General technical conditions" in the Related content; technical requirements and test methods for transport and storage projects using GB/T 11606-2007 "Analytical Instruments ring Environmental test methods "in the relevant content; and performance test methods for measuring instruments using JJG891-1995" capacitance Law and resistance method grain moisture meter "in the relevant content.
This type of evaluation outline for the first release.
This outline Appendix A, Appendix B and Appendix C are normative appendix.
Capacitance method and the resistance method grain moisture Tester type evaluation outline
1 Scope
This outline is applied to 0.5 Level 1 and capacitor sample analysis method and the resistance method grain moisture meter (hereinafter referred to as Grain moisture meter or instrument) of pattern evaluation, does not apply to on-line or plug pin grain moisture meter type evaluation.
2. References
JJG891-1995 capacitance method and the resistance method grain moisture meter GB 5497-1985 grain and oilseeds test determination of moisture content GB/T 11606-2007 analytical instruments environmental test methods GB/T 19878-2005 capacitance method and the resistance method grain moisture tester General technical conditions these documents contain provisions which through reference in this syllabus constitute provisions of this outline. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this syllabus, however, the drum Reed whether the latest versions of these files according to the parties that this outline agreement. Those who do not note cited date Use, the latest versions apply to this outline.
3 Terms
3.1 Grain Moisture Grain moisture refers to the weight of water and wet weight of the cereal grain percentage contained, also known as grain moisture content.
4 Overview
Grain moisture meter is mainly used for rapid determination of moisture content of grain.
Capacitance method is the use of grain moisture meter grain moisture content and its dielectric properties of the corresponding relationship between the design and manufacture of electrical the instrument, which consists of capacitive sensors (measuring cylinder), off the barrel and secondary instrument, and some also have weighing and temperature measurement Means for sample temperature and weight compensation. Fall into the measuring cylinder barrel role is to ensure that when each measurement cereals Sample state consistency.
Resistance method grain moisture analyzer is the existence of a correspondence between grain moisture content designed according to its resistivity Manufacturing equipment. It consists of measuring head and the second instrument configuration, measuring head with a grain sample crushing device and remains constant Pressurizing means power to ensure that each measurement is consistent with the degree of compaction sample.
5 to provide technical information and test prototype review
5.1 Technical Information 5.1.1 prototype photos;
5.1.2 product standards (including test methods);
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
How to Download JJF 1380-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1380-2012
$435.00