JG/T 361-2012On-line physical cleaning equipment for central air-conditioning systems (English PDF)
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for JG/T 361-2012 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 2012
Implementation date
August 1, 2012
Scope
JG/T 361-2012 (On-line physical cleaning equipment for central air-conditioning systems) is available as an English-translated PDF.
JG/T 361-2012 - This standard specifies the central air-conditioning online physical cleaning equipment (hereinafter referred to as online physical cleaning equipment) terms and definitions, classification and standard the basic rules, requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to central air-conditioning water system shell and tube heat exchanger ball-type cleaning equipment, cooling water and other uses of water systems online Physical cleaning equipment can refer to use.
Found what you need?
Document preview — JG/T 361-2012
National Standard of the People's Republic of China
- ICS
- 91.140.30
- Classification
- P45
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban air conditioning and purification equipment standard technology focal point centralized.
1 Scope
This standard specifies the central air-conditioning online physical cleaning equipment (hereinafter referred to as online physical cleaning equipment) terms and definitions, classification and standard the basic rules, requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to central air-conditioning water system shell and tube heat exchanger ball-type cleaning equipment, cooling water and other uses of water systems online Physical cleaning equipment can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 151 shell and tube heat exchanger GB 25131 vapor compression cycle cold water (heat pump) unit safety requirements GB/T 3214 pump flow measurement method GB/T 3797 electrical control equipment GB/T 10870 volumetric and centrifugal chilled water (heat pump) unit performance test methods GB/T 13927 industrial valve pressure test GB/T 15479 Industrial automation instrumentation insulation resistance, dielectric strength of the technical requirements and test methods DL/T 581 condenser glue ball cleaning equipment and recycled water filtration device HG/T 21637 chemical pipeline filter JB/T 4330 Refrigeration and air conditioning equipment noise measurement JB/T 5296 General valve flow coefficient and flow resistance coefficient of the test method JB/T 9633 Condenser rubber ball cleaning equipment TSGR0003 Simple Pressure Vessel Safety Technology Supervision Procedures TSGR0004 Fixed pressure vessel safety technology supervision procedures
3 Terms and definitions
The following terms and definitions apply to this document.
To the relative movement of the main mechanical, chemical and biological processes do not involve the physical methods of the normal operation of the central air conditioning water system into Line cleaning equipment, such as ball-type cleaning equipment.
Cleaning
Use a safe, effective and reasonable method to remove scale and dirt accumulated in air conditioning and water systems.
Scale scale
Closely attached to the air conditioning water system wall salts and other mineral deposits.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 25131Safety requirements for water chillers (heat pump) using the vapor compression cycle
- GB/T 3214Methods for measurement of capacity of pump
- GB/T 3797Electrical control assemblies
- GB/T 10870The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle
- GB/T 13927Industrial valves - Pressure testing
- GB/T 15479Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
GB 151 · TSG R0003 · TSG R0004
How to Download JG/T 361-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 581-2021 — Condenser rubber ball cleaning device and circulating water secondary filtration device
DL/T 5810-2020 — Design code for connecting electrochemical energy storage power station to power grid
DL/T 5811-2020 — Technical Guidelines for Installation of Inner Cooling of Hydrogenerator
Secure payment via Stripe
Payments accepted
JG/T 361-2012
$165.00