JG/T 184-2011Kitchen for housing (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces JG/T 184-2006 "residential kitchen" compared with JG/T 184-2006, in addition to editorial changes outside the main technology the changes are as follows.

--- Will be classified in advance to Chapter 4, an increase of the classification of residential kitchen as a whole, modified the classification of kitchen furniture and kitchen equipment;

--- Modify the "kitchen net area list" content, an increase of width of 1500mm, length of 2100mm, 2400mm Size series, the removal of the width of 4200mm size series, an increase of suitable for a small area of the size of the kitchen area;

--- Modify the length of the kitchen, the minimum width of the net size series, an increase of the size of the closet kitchen size requirements, an increase of accessible kitchen Size requirements;

--- Remove the type I, II, L-type kitchen layout of the table layout;

--- Modify the logo size of kitchen furniture;

--- Remove the cabinets and kitchen cabinets related to the size of the relevant links;

--- Increased high cabinet size (modulus) series;

--- Increasing the kitchen furniture and kitchen equipment with the size requirements;

--- Modify the pipeline and equipment interface requirements;

--- Increasing the kitchen table remote measurement requirements;

--- Modify the hardware performance requirements;

--- Increase the performance requirements of the sink;

--- Added "Appendix A (informative) residential overall kitchen typical layout type." this standard proposed by the Ministry of Housing and Urban Standard and Design Institute.

This standard by the Housing and Urban-Rural Housing Component Standardization Technical Committee centralized.

1 Scope

This standard specifies the terms and definitions of residential kitchen,, area and layout type, size (modulus) series, piping and equipment Preparation of interfaces, technical requirements, test methods, inspection rules, signs, product manuals, packaging, transportation and storage.

This standard applies to residential buildings used in the overall kitchen.

2 Normative references

The following standards for the application of this standard is essential. For dated references, only the dated version applies to this edition standard. For undated references, the latest edition (including all amendments) applies to this standard.

GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. batch acceptance inspection by acceptance quality limit (AQL) sampling Plan (ISO 2859-1.:1999, IDT) GB/T 2829-2002 periodic inspection count sampling procedures and tables (for the stability of the test process) GB/T 3280-2007 Stainless steel cold rolled steel sheet and strip General specification for wooden furniture GB/T 3324-2008 GB 4706.1 Safety of household and similar electrical appliances - Part 1. General requirements Building materials - Limits of radionuclides Building materials and products combustion rating GB/T 9799 metal clad steel zinc coating Basic parameters of domestic kitchens and related equipment GB/T 11228-2008 GB 18145 ceramic sealing faucet GB 18580 interior decoration materials and panels of formaldehyde emission limit GB 18584 interior decoration materials wood furniture harmful substances limit Household kitchen equipment - Part 1. Terminology Household kitchen equipment - Part 3. Test methods and test rules Town gas design code JCD/T 162-2009 Residential remote meter reading system Residential kitchen furniture and kitchen equipment modulus series JC908 solid surface material QB/T 2454 furniture metal drawer rail requirements and inspection QB/T 2531-2001 Kitchen Furniture QB/T 3832-1999 Light metal products corrosion evaluation of the results of the test

3 Terms and definitions

GB/T 18884.1-2002 defined and the following terms and definitions apply to this standard.