JB/T 9991-2013Electroplated diamond reamers (English PDF)
电镀金刚石铰刀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9991-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 9991-2013 is the English-translated version of 电镀金刚石铰刀.
JB/T 9991-2013 is a recommended machinery industry standard of China on electroplated diamond reamers. It sets the type and the size of the tool, together with the technical requirements that the reamer has to meet.
The reamers covered are the electroplated diamond reamers used for the precision machining of through holes in cast iron, up to a machining accuracy of grade 4.
It replaces JB/T 9991-1999. It quotes GB/T 6409.2. Its Chinese classification is J41 and its international classification 25.100.30.
Found what you need?
Document preview — JB/T 9991-2013
National Standard of the People's Republic of China
- ICS
- 25.100.30
- Replacing
- JB/T 9991-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 9991-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 9991-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended machinery industry standard of China on electroplated diamond reamers. It sets the type and the size of the tool, together with the technical requirements that the reamer has to meet. The reamers covered are the electroplated diamond reamers used for the precision machining of through holes in cast iron, up to a machining accuracy of grade 4. It replaces JB/T 9991-1999. It quotes GB/T 6409.2. Its Chinese classification is J41 and its international classification 25.100.30.
JB/T 9991-2013 falls under ICS 25.100.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 6409.2
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9991-1999 (earlier edition)
Standards on related subjects:
GB/T 972-2008 — Thread rolling flat dies
GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines
GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines
JB/T 9999-2013 — Thread Rolling Flat Dies for Taper Pipe Threads with 55° Thread Angle
JB/T 9986-2013 — Metallographic examination of heat treated tools
JB/T 10000-2013 — Thread rolling dies for 55° taper pipe threads
6 Classification and status
International classification (ICS): 25.100.30
Chinese Standard Classification (CCS): J 41
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of JB/T 9991
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9991-2013 | Electroplated diamond reamers | current edition | Current |
| JB/T 9991-1999 | Electroplated diamond reamers | previous edition | Superseded |
This page sells the current edition, JB/T 9991-2013. Earlier editions are listed for reference only.
How to Download JB/T 9991-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6409.2-1996 — Abrasive products--Diamond or cubic boron nitride grinding tools--Form and dimensions
GB/T 6409.2-2009 — Super-abrasives - Diamond or cubic boron nitride grinding tools - Shapes and dimensions
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 9991-2013
$85.00