JB/T 9939-2013Tap chuck (English PDF)
丝锥夹头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9939-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 9939-2013 is the English-translated version of 丝锥夹头.
JB/T 9939-2013 is the recommended Chinese machinery industry standard for tap chucks. It fixes their types and parameters, the requirements they must meet, the trial cutting, the marking and testing, and the labelling, packaging and documents that go with the product.
It applies to tap chucks for machine tools fitted with a safety overload mechanism. Among the standards it quotes are GB/T 1443-1996, GB/T 3464.1-2007, GB/T 3837-2001, GB/T 10944.1-2006, GB/T 23575-2009, JB/T 2326-2005 and JB/T 9935-2011.
The chuck is classified J52 in the Chinese system and 25.060.20 in the international one.
Found what you need?
Document preview — JB/T 9939-2013
National Standard of the People's Republic of China
- ICS
- 25.060.20
- Replacing
- JB/T 9939.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 9939-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It is one of 3 parts of the JB/T 9939 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for tap chucks. It fixes their types and parameters, the requirements they must meet, the trial cutting, the marking and testing, and the labelling, packaging and documents that go with the product. It applies to tap chucks for machine tools fitted with a safety overload mechanism. Among the standards it quotes are GB/T 1443-1996, GB/T 3464.1-2007, GB/T 3837-2001, GB/T 10944.1-2006, GB/T 23575-2009, JB/T 2326-2005 and JB/T 9935-2011. The chuck is classified J52 in the Chinese system and 25.060.20 in the international one.
JB/T 9939-2013 falls under ICS 25.060.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1443-1996 — Machine tool. Self-holding tapers for tool shanks
GB/T 3464.1-2007 — Machine and hand taps—Part 1:Plain parallel shank machine and hand taps
GB/T 3837-2001 — 7/24 tapers for tool shanks for manual changing
GB/T 10944.1-2006 — Tool shanks with 7: 24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Part 1: Dimensions and conicity tolerances
GB/T 23575-2009 — Metal cutting machine tools - Check and evaluation for taper surface by miniating
JB/T 2326-2005 — Machine tool accessories - Type designation method
JB/T 3207-2005 — Machine tool accessories - General technical requirements for product packaging
JB/T 9935-2011 — Machine tool accessories - Preparation of accompanying technical documents
4 Where this standard sits
It cites 8 standards, among them GB/T 1443-1996, GB/T 3464.1-2007, GB/T 3837-2001, listed in full above.
It is one part of the JB/T 9939 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 9939.1-1999 — Tap chucks - Types and parameters
JB/T 9939.2-1999 — Tap chucks - Technical requirements
Standards on related subjects:
JB/T 12396-2015 — Proportional valve solenoids
GB/T 4346-2008 — Machine tools - Manually operated self-centring chucks
JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements
JB/T 9940.2-2013 — Self-holding taper reduction sleeves for tool shanks - Part 2: Technical specifications
JB/T 9936-2011 — Tilting machine vice
JB/T 9935-2011 — Machine tool accessories - Preparation of accompanying technical documents
7 Classification and status
International classification (ICS): 25.060.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1443-1996Self-holding tapers for machine tools and tool shanks
- GB/T 3464.1-2007Machine and hand taps—Part 1:Plain parallel shank machine and hand taps
- GB/T 3837-20017/24 tapers for tool shanks for manual changing
- GB/T 10944.1-2006Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
- GB/T 23575-2009Metal cutting machine tools - Check and evaluation for taper surface by miniating
- JB/T 2326-2005Machine tool accessories - Type designation method
Editions of JB/T 9939
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9939-2013 | Tap chuck | current edition | Current |
| JB/T 9939.1-1999 | Tap chuck | previous edition | Superseded |
This page sells the current edition, JB/T 9939-2013. Earlier editions are listed for reference only.
How to Download JB/T 9939-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10944.1-2006 — Tool shanks with 7: 24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Part 1: Dimensions and conicity tolerances
GB/T 1443-1996 — Machine tool. Self-holding tapers for tool shanks
GB/T 23575-2009 — Metal cutting machine tools - Check and evaluation for taper surface by miniating
JB/T 9939-2013
$229.00