JB/T 9542-2015General specification for two-value capacitor asynchronous motors (English PDF)
双值电容异步电动机通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9542-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 9542-2015 is the English-translated version of 双值电容异步电动机通用技术条件.
JB/T 9542-2015 is the Chinese standard "General specification for two-value capacitor asynchronous motors". Its scope clause reads: This Standard specifies the types, basic parameters and dimensions, technical requirements, test methods, inspection rules, marking, packaging, storage and transportation for two-value capacitor asynchronous motors.
This Standard applies to two-value capacitor asynchronous motors (frame size 71 ~ 112) (hereinafter referred to as motors); for all kinds of motors derived from this series of motors, this Standard can be referred to. Its clauses include test methods; inspection rules.
Found what you need?
Document preview — JB/T 9542-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 9542-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword3
- 1 Scope5
- 2 Normative references5
- 3 Types, basic parameters and dimensions6
- 4 Technical requirements12
- 5 Test methods16
- 6 Inspection rules16
- 7 Marking, packaging, storage and transportation19
1 Scope
This Standard specifies the types, basic parameters and dimensions, technical requirements, test methods, inspection rules, marking, packaging, storage and transportation for two-value capacitor asynchronous motors.
This Standard applies to two-value capacitor asynchronous motors (frame size 71 ~
112) (hereinafter referred to as motors); for all kinds of motors derived from this series of motors, this Standard can be referred to.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced documents (including all amendments) applies to this document.
GB 755, Rotating electrical machines – Rating and performance
GB/T 4942.1, Degrees of protection provided by the integral design of rotating electrical machined (IP code) – Classification
GB/T 5171.1, Small power motors – Part 1: General technical requirements
GB/T 9651, Test procedures for single-phase induction motor
GB/T 10069.1, Measurement of airborne noise emitted by rotating electrical machines and the noise limits – Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB 12350, Safety requirements of small-power motors
JB/T 10490, Mechanical vibration of small power motors – measurement, evaluation and limits of vibration […]
4.18
The surface of motors shall be free from visible spots, wrinkles, bubbles, bruises
cracks or attached dirt.
4.19
Manufacturers shall guarantee that within one year of use, motors are capable of operating normally in not exceeding two years’ time after the manufacturing date of manufacturers, provided that users use and store motors correctly as specified in instructions for use and maintenance of manufacturers. If damages occur because of ill manufacturing within the time specified or motors are not able to operate normally, manufacturers shall repair or replace parts and even motors free of charge.
4.20
The safety items nor covered in this Standard shall be as specified in GB 12350.
5 Test methods
5.1
Electrical property test of motors shall be carried out as specified in this Standard and GB/T 9651.
5.2
Testing of vibration shall be carried out as specified in JB/T 10490.
5.3
Testing of noise shall be carried out as specified in GB/T 10069.1.
5.4
Testing of breaking-off rotational speed of centrifugal switches shall be carried out as specified in GB/T 9651.
5.5
Test of enclosure protection degree shall be carried out as specified in GB/T 4942.1.
5.6
Inspection of safety requirements for motors shall be carried out as specified in GB 12350.
6 Inspection rules
6.1 Exit-factory inspection
6.1.1
Each motor shall be delivered only when they pass the exit-factory inspection and attached with a certificate of soundness.
6.1.2
The items of exit-factory inspection include:
a) mechanical inspection, including:
-- rotation inspection: during rotation, motors shall move smoothly and flexibly without stagnation. The sound shall be uniform and harmonious without […]
6.2 Type inspection
6.2.1
Type inspection needs to be carried out in one of the following cases:
a) when the trial production of a new product is completed;
b) when any change in design and technology of motors which is sufficient to cause any change in some properties, relevant type inspection items shall be carried out;
c) when there is any unallowable deviation of current exit-factory inspection results from previous type inspection results;
d) sampling for inspection at fixed period at least once every two years.
6.2.2
The items of type inspection include:
a) all items of exit-factory inspection;
b) determination of locked-rotor torques (determined in the cold state);
c) temperature rise test;
d) determination of efficiencies and power factors;
e) short-time over-torque test;
f) determination of maximum torques;
g) determination of minimum torques during the starting process;
h) over-speed test;
i) determination of vibration and noise;
j) determination of voltage at the capacitor end;
k) enclosure protection degree test;
l) damp heat test.
6.2.3
The number of sample machines for type test shall not be smaller than 3. In case of any non-conformance item in samples, the number of products sampled for this item shall be doubled. If they still fail to pass, then the batch of products can only be delivered after the non-conformance is eliminated.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 9542
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9542-2015 | General specification for two-value capacitor asynchronous motors | current edition | Current |
| JB/T 9542-1999 | General specification for two-value capacitor asynchronous motors | previous edition | Superseded |
This page sells the current edition, JB/T 9542-2015. Earlier editions are listed for reference only.
How to Download JB/T 9542-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 9542-2015
$125.00