JB/T 942-2012Jigs for coal (English PDF)
煤用跳汰机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 942-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 942-2012 is the English-translated version of 煤用跳汰机.
JB/T 942-2012 is a recommended machinery industry standard of China for jigs used on coal. It fixes the types and basic parameters of the coal jig and goes on to the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
Machines that sort coal by jigging are what it governs. Its Chinese classification is D96 and its international classification 73.120. Among the standards it quotes are GB/T 1184-1996, GB/T 1804-2000, GB/T 3797, GB/T 25706 and JB/T 5000.3-2007. It takes the place of JB/T 942-2000 and JB/T 6115-2004.
Found what you need?
Document preview — JB/T 942-2012
National Standard of the People's Republic of China
- ICS
- 73.120
- Replacing
- JB/T 6115-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 942-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition JB/T 942-2000.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended machinery industry standard of China for jigs used on coal. It fixes the types and basic parameters of the coal jig and goes on to the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Machines that sort coal by jigging are what it governs. Its Chinese classification is D96 and its international classification 73.120. Among the standards it quotes are GB/T 1184-1996, GB/T 1804-2000, GB/T 3797, GB/T 25706 and JB/T 5000.3-2007. It takes the place of JB/T 942-2000 and JB/T 6115-2004.
JB/T 942-2012 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3768
GB/T 3797
GB/T 6388
GB/T 9969
GB/T 13306
GB/T 25706
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000.10
JB/T 5000.12-2007 — General technical requirements for heavy machinery - Part 12: Painting
JB/T 5000.13
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 942-2000 (earlier edition)
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 10605-2015 — Center driving rotary-rake thickener
JB/T 9041-2025 — Adsorption tank
JB/T 4244-2025 — Suspended shaker
JB/T 3275-2025 — Sector filter plates for disc vacuum filters
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 96
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 3797Electrical control assemblies
- GB/T 6388Transport package shipping mark
Editions of JB/T 942
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 942-2012 | Jigs for coal | current edition | Current |
| JB/T 6115-2004 | Jigs for coal | previous edition | Superseded |
This page sells the current edition, JB/T 942-2012. Earlier editions are listed for reference only.
How to Download JB/T 942-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 942-2012
$165.00