JB/T 9040-2010Belt filter presses (English PDF)
带式压滤机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9040-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 13, 2011
Implementation date
April 1, 2011
Scope
JB/T 9040-2010 is the English-translated version of 带式压滤机.
JB/T 9040-2010 is a recommended Chinese machinery industry standard for belt filter presses. It fixes the product classification of the press, its technical requirements, the test methods and the inspection rules, and it goes on to marking, labelling, the instruction manual, packaging, transport and storage.
The machine covered is stated to serve the dewatering of industrial wastewater, urban sewage and sludge. The standard sits at D96 in the Chinese classification and at 73.120 in the international one, and the issuing agency recorded for it is the Ministry of Industry and Information Technology.
Among the standards it quotes are GB/T 1184-1996, GB/T 1958, GB/T 9239.1-2006 and MT 962. It replaces JB/T 9040-1999.
Found what you need?
Document preview — JB/T 9040-2010
National Standard of the People's Republic of China
- ICS
- 73.120
- Replacing
- JB/T 9040-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 9040-2010 was issued by MIIT on 13 January 2011 and has been in force since 1 April 2011.
It replaces the earlier edition JB/T 9040-1999.
2 Scope
This standard is a recommended Chinese machinery industry standard for belt filter presses. It fixes the product classification of the press, its technical requirements, the test methods and the inspection rules, and it goes on to marking, labelling, the instruction manual, packaging, transport and storage. The machine covered is stated to serve the dewatering of industrial wastewater, urban sewage and sludge. The standard sits at D96 in the Chinese classification and at 73.120 in the international one, and the issuing agency recorded for it is the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 1184-1996, GB/T 1958, GB/T 9239.1-2006 and MT 962. It replaces JB/T 9040-1999.
3 Normative references
JB/T 9040-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1720-1979
GB/T 1958
GB/T 3768
GB/T 6388
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 9969
GB/T 13306
JB/T 1604
JB/T 5000.12
JB/T 5000.13
MT 962
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9040-1999 (earlier edition)
6 Classification and status
International classification (ICS): 73.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1720-1979Circle-drawing test of coating films
- GB/T 1958Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 6388Transport package shipping mark
MT 962
Similar standards
Editions of JB/T 9040
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9040-2010 | Belt filter presses | current edition | Current |
| JB/T 9040-1999 | Belt filter presses | previous edition | Superseded |
This page sells the current edition, JB/T 9040-2010. Earlier editions are listed for reference only.
How to Download JB/T 9040-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13306-2011 — Plates
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
Secure payment via Stripe
Payments accepted
JB/T 9040-2010
$105.00