Valid

JB/T 8894-2015Reciprocating internal combustion engines - Flywheels - Mounting dimensions for clutches (English PDF)

往复式内燃机飞轮 离合器用安装尺寸

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8894-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 8894-2015 is the English-translated version of 往复式内燃机飞轮 离合器用安装尺寸.

JB/T 8894-2015 is a recommended Chinese machinery industry standard fixing the mounting dimensions by which clutches are fitted to the flywheels of reciprocating internal combustion engines.

It gives the basic dimensions and the tolerances that bear on the interchangeability of flywheels with spring-loaded single-piece or two-piece clutches, the flywheel being one used with the flywheel housings and clutches of ISO 7648 and ISO 7649; dimensions and tolerances it does not specify are left to the maker of the component.

It applies to reciprocating internal combustion engines other than aircraft and automotive engines, and to engines of other uses for which no specific international standard exists.

It is a modified adoption of ISO 11055:1996 and replaces JB/T 8894-1999. It quotes GB/T 1182-2008 and GB/T 1800.2-2009.

Found what you need?

Document preview — JB/T 8894-2015

National Standard of the People's Republic of China

ICS
43.060.10; 27.020
Replacing
JB/T 8894-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 8894-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.

It replaces the earlier edition JB/T 8894-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard fixing the mounting dimensions by which clutches are fitted to the flywheels of reciprocating internal combustion engines. It gives the basic dimensions and the tolerances that bear on the interchangeability of flywheels with spring-loaded single-piece or two-piece clutches, the flywheel being one used with the flywheel housings and clutches of ISO 7648 and ISO 7649; dimensions and tolerances it does not specify are left to the maker of the component. It applies to reciprocating internal combustion engines other than aircraft and automotive engines, and to engines of other uses for which no specific international standard exists. It is a modified adoption of ISO 11055:1996 and replaces JB/T 8894-1999. It quotes GB/T 1182-2008 and GB/T 1800.2-2009.

JB/T 8894-2015 falls under ICS 43.060.10; 27.020, in the field of road vehicle engineering.

This catalogue holds 2 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1182-2008 — Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out

GB/T 1800.2-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 8894-1999 (earlier edition)

Standards on related subjects:

GB/T 1148-2010 — Internal combustion engines - Aluminium pistons - Specifications

JB/T 6729-2007 — Internal combustion engines - Magnetic particle testing of crankshafts and camshafts

JB/T 6289-2005 — Internal combustion engines - Cast aluminium pistons - Metallographic examination

JB/T 6721-2025 — Internal combustion engine - link - Magnetic Particle Testing

JB/T 5084-2025 — Internal combustion engine - Crankshaft thrust washer - Technical specifications

JB/T 8892-2011 — Internal combustion engines - Metallographic examination of rare earth eutectic aluminium-silicon alloy pistons

6 Classification and status

International classification (ICS): 43.060.10; 27.020

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8894

EditionTitleRevisionStatus
JB/T 8894-2015Reciprocating internal combustion engines - Flywheels - Mounting dimensions for clutchescurrent editionCurrent
JB/T 8894-1999Reciprocating internal combustion engines - Flywheels - Mounting dimensions for clutchesprevious editionSuperseded

This page sells the current edition, JB/T 8894-2015. Earlier editions are listed for reference only.

How to Download JB/T 8894-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8894-2015

$219.00