Valid

JB/T 8852.2-2000Rotary drum dryers (English PDF)

转筒干燥机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8852.2-2000 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 31, 2000

Implementation date

January 1, 2001

Scope

JB/T 8852.2-2000 is the English-translated version of 转筒干燥机.

JB/T 8852.2-2000 is the Chinese standard "Rotary drum dryers". Its scope clause reads: This standard specifies product classification, technical requirements, test methods, inspection rules, marking, packing, transport and storage of rotary dryer drum.

This standard is applicable to rotary dryer drum (hereinafter referred to as "dryer") which utilizes direct heat transfer mode to dry materials. This dryer is mainly used for drying slag, clay, limestone, coal, metal concentrate and some chemical materials, etc. Its clauses include product classification.

Found what you need?

Document preview — JB/T 8852.2-2000

National Standard of the People's Republic of China

Replacing
JB/T 8852.2-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Contents
  • Foreword I
  • 1 Scope
  • 2 Normative References
  • 3 Product Classification
  • 4 Technical Requirements
  • 5 Test Methods
  • 6 Inspection Rules
  • 7 Marking, Label and Operation Instruction
  • 8 Packing, Transport and Storage

1 Scope

This standard specifies product classification, technical requirements, test methods, inspection rules, marking, packing, transport and storage of rotary dryer drum.

This standard is applicable to rotary dryer drum (hereinafter referred to as "dryer") which utilizes direct heat transfer mode to dry materials. This dryer is mainly used for drying slag, clay, limestone, coal, metal concentrate and some chemical materials, etc.

2 Normative References

The following documents contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, all editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.

GB 191-1990 "Packaging-Pictorial Marking for Handling of Goods"

GB/T 699-1999 "Quality Carbon Structural Steels"

GB/T 700-1988 "Carbon Structural Steels"

GB/T 1720-1979 "Method of test for Adhesion of Paint Films"

GB/T 1804-1992 "General Tolerances-Tolerances for Linear Dimension without Tolerance Indications"

GB/T 3274-1988 "Carbon Structural and Low Alloy Steel-Rolled Plates and Strips"

GB/T 3323-1987 "Methods for Radiographic Inspection and Classification of Radiographs for Fusion Welded Butt Joints in Steel"

GB/T 3768-1996 "Acoustics-Determination of Sound Power Levels of Noise Sources Using Sound Pressure-Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane"

GB/T 6388-1986 "Transport Package Shipping Mark"

GB/T 9439-1988 "Grey Iron Castings"

GB 9969.1-1998 "General Principles for Preparation of Instructions for Use of Industrial Products"

GB/T 10095-1988 "Accuracy of Involute Cylindrical Gears"

GB/T 11352-1989 "Carbon Steel Castings for General Engineering Purpose"

GB/T 13306-1991 "Plate"

GB/T 13384-1992 "General Specifications for Packing of Mechanical and Electrical Product"

JB 4730-1994 "Nondestructive Testing of Pressure Vessels"

JB/T 88521-1999 "Drum Dryer-Wheel Device"

JB/T 8853-1999 "Reduction Cylindrical Gear Units"

3 Product Classification

3.1 Type

3.1.1

According to the position of driving device, the dryer is classified into left and right driving types: in view of feed direction, it is left driving (see Figure 1) if the driving device is on the left of the dryer; it is right driving if on the right, (see Figure 2).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8852.2

EditionTitleRevisionStatus
JB/T 8852.2-2000Rotary drum dryerscurrent editionCurrent
JB/T 8852.2-1999Rotary drum dryersprevious editionSuperseded

This page sells the current edition, JB/T 8852.2-2000. Earlier editions are listed for reference only.

How to Download JB/T 8852.2-2000

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8852.2-2000

$85.00