JB/T 8789-2010Gauges of 1:24 tapers (English PDF)
1∶24(UG)圆锥量规
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8789-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 8789-2010 is the English-translated version of 1∶24(UG)圆锥量规.
JB/T 8789-2010 is a recommended Chinese machinery industry standard for gauges of 1:24 tapers. It sets the requirements for these gauges and the test methods, marking and packaging that go with them.
It applies to gauges used in checking the 1:24 taper, named for the spindle ends of bevel gear grinding machines and milling machines and for the mating and cutter setting tooling used with them.
It replaces JB/T 8789-1998, an edition listed under the title 1:24 (UG) taper gauge, and it quotes GB/T 11852-2003. Issued by the Ministry of Industry and Information Technology, it carries Chinese classification J42 with international classification 17.040.30.
Found what you need?
Document preview — JB/T 8789-2010
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Replacing
- JB/T 8789-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8789-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 8789-1998.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for gauges of 1:24 tapers. It sets the requirements for these gauges and the test methods, marking and packaging that go with them. It applies to gauges used in checking the 1:24 taper, named for the spindle ends of bevel gear grinding machines and milling machines and for the mating and cutter setting tooling used with them. It replaces JB/T 8789-1998, an edition listed under the title 1:24 (UG) taper gauge, and it quotes GB/T 11852-2003. Issued by the Ministry of Industry and Information Technology, it carries Chinese classification J42 with international classification 17.040.30.
JB/T 8789-2010 falls under ICS 17.040.30, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 11852-2003 — Tolerances and specification of taper gauges
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 8789-1998 (earlier edition)
Standards on related subjects:
GB/T 10932-2024 — Screw thread micrometer
GB/T 1218-2018 — Depth micrometer
GB/T 1957-2006 — Tolerances and general features for plain limit gauges
JB/T 5610-2025 — Laser interferometer
JB/T 8791-2012 — Expanding head bore dial indicator
JB/T 8790-2012 — Ball-type bore dial gauges
6 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 8789
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8789-2010 | Gauges of 1:24 tapers | current edition | Current |
| JB/T 8789-1998 | Gauges of 1:24 tapers | previous edition | Superseded |
This page sells the current edition, JB/T 8789-2010. Earlier editions are listed for reference only.
How to Download JB/T 8789-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11852-2003 — Tolerances and specification of taper gauges
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 8789-2010
$85.00