Valid

JB/T 8632-2011Guide for test method of arc erosion of electrical contact materials (English PDF)

电触头材料电弧烧损试验方法指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8632-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

April 1, 2012

Scope

JB/T 8632-2011 is the English-translated version of 电触头材料电弧烧损试验方法指南.

JB/T 8632-2011 is the Chinese machinery industry standard covering guide for test method of arc erosion of electrical contact materials. It was issued on 20 December 2011 and has been in force since 1 April 2012, replacing JB/T 8632-1997.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2011 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8632-2011

National Standard of the People's Republic of China

Replacing
JB/T 8632-1997

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8632-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.

It replaces the earlier edition JB/T 8632-1997.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 8632-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

JB/T 8632-1997 (earlier edition)

Standards on related subjects:

JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators

GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties

GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials

JB/T 8633-2017 — Technical requirements for wires for rivet-type electrical contacts

JB/T 9548.10-2015 — Methods for chemical analysis of iron-chromium-aluminium alloys - Part 10: Determination of sulfur

5 Classification and status

Chinese Standard Classification (CCS): K 14

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8632

EditionTitleRevisionStatus
JB/T 8632-2011Guide for test method of arc erosion of electrical contact materialscurrent editionCurrent
JB/T 8632-1997Guide for test method of arc erosion of electrical contact materialsprevious editionSuperseded

This page sells the current edition, JB/T 8632-2011. Earlier editions are listed for reference only.

How to Download JB/T 8632-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8632-2011

$65.00