JB/T 8214.5-1999QDZ pneumatic unit combination instruments - Computing units (English PDF)
QDZ气动单元组合仪表 计算单元
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8214.5-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 6, 1999
Implementation date
January 1, 2000
Scope
JB/T 8214.5-1999 is the English-translated version of QDZ气动单元组合仪表 计算单元.
JB/T 8214.5-1999 is a recommended standard of the Chinese machinery industry and forms the fifth part of the series on QDZ pneumatic unit combination instruments, the part given over to the computing unit.
It fixes the types and basic parameters of the QJ series computing units, the requirements for their technical performance, and the test and evaluation methods by which those are verified.
The subject is the computing device of the QDZ modular pneumatic instrumentation, used in process measurement and control. Its quoted standards are GB/T 2828-1987, GB/T 15464-1995, JB/T 8222-1999 and JB/T 9329-1999, and it is classified under N20 and the international class 17.220.20.
It supersedes JB/T 8214.5-1995. Issued on 6 August 1999, it has applied since 1 January 2000.
Found what you need?
Document preview — JB/T 8214.5-1999
National Standard of the People's Republic of China
- ICS
- 17.220.20
- Replacing
- JB/T 8214.5-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8214.5-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 August 1999.
It replaces the earlier edition JB/T 8214.5-1995.
It is one of 11 parts of the JB/T 8214 series.
2 Scope Preview
This standard is a recommended standard of the Chinese machinery industry and forms the fifth part of the series on QDZ pneumatic unit combination instruments, the part given over to the computing unit. It fixes the types and basic parameters of the QJ series computing units, the requirements for their technical performance, and the test and evaluation methods by which those are verified. The subject is the computing device of the QDZ modular pneumatic instrumentation, used in process measurement and control. Its quoted standards are GB/T 2828-1987, GB/T 15464-1995, JB/T 8222-1999 and JB/T 9329-1999, and it is classified under N20 and the international class 17.220.20. It supersedes JB/T 8214.5-1995.
JB/T 8214.5-1999 falls under ICS 17.220.20, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2828-1987
GB/T 15464-1995 — Gmeneral-purpose specification for the packaging instrumentation products
JB/T 8222-1999 — Methods of evaluating the performance of electric and pneumatic analogue computing units for industrial process measurement and control systems
JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage
4 Where this standard sits
It cites 4 standards, among them GB/T 15464-1995, JB/T 8222-1999, JB/T 9329-1999, listed in full above.
It is one part of the JB/T 8214 series, of which this catalogue holds 11 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 8214.1-1995 — QDZ pneumatic unit assembled instruments - Controllers
JB/T 8214.1-1999 — Controllers
JB/T 8214.2-1995 — QDZ pneumatic unit assembled instruments - Relays
JB/T 8214.2-1999 — Relays
JB/T 8214.3-1995 — QDZ pneumatic unit assembled instruments - Set point stations
JB/T 8214.3-1999 — Setting units
JB/T 8214.4-1995 — QDZ pneumatic unit assembled instruments - Indicating recording controllers
JB/T 8214.4-1999 — Indicating and recording controllers
JB/T 8214.6-1999 — Differential pressure transmitters
JB/T 8214.7-1999 — Pressure transmitters
Other editions:
JB/T 8214.5-1995 (earlier edition)
7 Classification and status
International classification (ICS): 17.220.20
Chinese Standard Classification (CCS): N 15
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 15464-1995Gmeneral-purpose specification for the packaging instrumentation products
- JB/T 8222-1999Methods of evaluating the performance of electric and pneumatic analogue computing units for industrial process measurement and control systems
- JB/T 9329-1999Instruments - Basic environmental conditions and test methods for transportation and storage
GB/T 2828-1987
Similar standards
Editions of JB/T 8214.5
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8214.5-1999 | QDZ pneumatic unit combination instruments - Computing units | current edition | Current |
| JB/T 8214.5-1995 | QDZ pneumatic unit combination instruments - Computing units | previous edition | Superseded |
This page sells the current edition, JB/T 8214.5-1999. Earlier editions are listed for reference only.
How to Download JB/T 8214.5-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15464-1995 — Gmeneral-purpose specification for the packaging instrumentation products
JB/T 8222-1999 — Methods of evaluating the performance of electric and pneumatic analogue computing units for industrial process measurement and control systems
JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage
JB/T 8214.5-1999
$229.00