Valid

JB/T 8116-1998Platen die cutting and creasing machines (English PDF)

平压模切机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8116-1998 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 19, 1998

Implementation date

July 1, 1998

Scope

JB/T 8116-1998 is the English-translated version of 平压模切机.

JB/T 8116-1998 is the Chinese machinery industry standard covering platen die cutting and creasing machines. It was issued on 19 March 1998 and has been in force since 1 July 1998, replacing JB/T 8116-1995.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1998 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8116-1998

National Standard of the People's Republic of China

Replacing
JB/T 8116-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8116-1998 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 19 March 1998 and has been in force since 1 July 1998.

It replaces the earlier edition JB/T 8116-1995.

It is one of 3 parts of the JB/T 8116 series.

2 Scope Preview

JB/T 8116-1998 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 8116.1-2006 — Printing machinery - Platen die cutting machines - Part 1: Horizontal platen die cutting machines

JB/T 8116.2-2007 — Printing machinery - Platen die cutting machines - Part 2: Vertical platen die cutting machines

Other editions:

JB/T 8116-1995 (earlier edition)

Standards on related subjects:

GB/T 35579-2017 — General specifications of gasoline vapor recovery unit

JB/T 8550-2011 — Open-pit crawler drill rigs

JB/T 8532-2008 — Pulse jet bag filters

JB/T 9124.2-2025 — Flatbed Screen Printing Machines - Part 2: Roller-Type Flatbed Screen Printing Machine

JB/T 9117-2025 — Metal Plate Offset Printing Machine

JB/T 6530-2018 — Product naming and type designation method for printing machines

5 Classification and status

Chinese Standard Classification (CCS): J 87

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 8116

EditionTitleRevisionStatus
JB/T 8116-1998Platen die cutting and creasing machinescurrent editionCurrent
JB/T 8116-1995Platen die cutting and creasing machinesprevious editionSuperseded

This page sells the current edition, JB/T 8116-1998. Earlier editions are listed for reference only.

How to Download JB/T 8116-1998

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8116-1998

$329.00