JB/T 7990-2012Superabrasive - Synthetic Diamond and Cubic Boron Nitride Micropowder (English PDF)
超硬磨料 人造金刚石和立方氮化硼微粉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7990-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 7990-2012 is the English-translated version of 超硬磨料 人造金刚石和立方氮化硼微粉.
JB/T 7990-2012 is the Chinese machinery industry standard covering superabrasive - Synthetic Diamond and Cubic Boron Nitride Micropowder. It was issued on 24 May 2012 and has been in force since 1 November 2012, replacing JB/T 7990-1998.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2012 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7990-2012
National Standard of the People's Republic of China
- Replacing
- JB/T 7990-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7990-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition JB/T 7990-1998.
It is one of 5 parts of the JB/T 7990 series.
2 Scope Preview
JB/T 7990-2012 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
One other standard in this catalogue cites it: JB/T 12542-2015.
It is one part of the JB/T 7990 series, of which this catalogue holds 5 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 7990.1-1995 — Grit sizes and their composition of synthetic diamond micron powder and cubic boron nitride micron powder
JB/T 7990.2-1995 — Test method for grit composition of synthetic diamond micron powder and cubic boron nitride micron powder
JB/T 7990.3-1995 — Test method for impurities in synthetic diamond micron powder and cubic boron nitride micron powder
JB/T 7990.4-1995 — Marking and packaging of synthetic diamond micron powder and cubic boron nitride micron powder
Other editions:
JB/T 7990-2025 (later edition)
JB/T 7990-1998 (earlier edition)
Standards on related subjects:
GB/T 2493-2023 — Test method for rotating strength of abrasive products
GB/T 2480-2022 — Conventional abrasive—Silicon carbide
JB/T 10155-2012 — Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper
JB/T 7998-2025 — Chemical analysis method of zirconium corundum
JB/T 7994-2025 — Superhard abrasives - Chemical analysis method of cubic boron nitride
JB/T 7993-2025 — Chemical analysis method of boron carbide
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 35479-2017Super-abrasive products -- Grinding tools with diamond or cubic boron nitride -- General survey and designation
- JB/T 13307-2017Superabrasive products - Diamond slurries
- JB/T 13310-2017Coated abrasives - Polyester film abrasives
- JB/T 12542-2015Superabrasive - Detonation polycrystalline diamond powders
Similar standards
Editions of JB/T 7990
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7990-2012 | Superabrasive - Synthetic Diamond and Cubic Boron Nitride Micropowder | current edition | Current |
| JB/T 7990-1998 | Superabrasive - Synthetic Diamond and Cubic Boron Nitride Micropowder | previous edition | Superseded |
This page sells the current edition, JB/T 7990-2012. Earlier editions are listed for reference only.
How to Download JB/T 7990-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7990.1-1995 — Grit sizes and their composition of synthetic diamond micron powder and cubic boron nitride micron powder
JB/T 7990.2-1995 — Test method for grit composition of synthetic diamond micron powder and cubic boron nitride micron powder
JB/T 7990.3-1995 — Test method for impurities in synthetic diamond micron powder and cubic boron nitride micron powder
JB/T 7990-2012
$85.00