JB/T 7988.2-1999Superabrasives - Test method for impurities (English PDF)
超硬磨料 杂质检验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7988.2-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 20, 1999
Implementation date
January 1, 2000
Scope
JB/T 7988.2-1999 is the English-translated version of 超硬磨料 杂质检验方法.
JB/T 7988.2-1999 is the Chinese machinery industry standard covering superabrasives - Test method for impurities. It was issued on 20 May 1999 and has been in force since 1 January 2000, replacing JB/T 7988.2-1995.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7988.2-1999
National Standard of the People's Republic of China
- Replacing
- JB/T 7988.2-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7988.2-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 May 1999.
It replaces the earlier edition JB/T 7988.2-1995.
It is one of 5 parts of the JB/T 7988 series.
2 Scope Preview
JB/T 7988.2-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 7988.1-1995 — Synthetic diamond or cubic boron nitride - Determination of compressive strength
JB/T 7988.1-1999 — Superabrasives - Determination of compressive strength
JB/T 7988.3-1995 — Synthetic diamond or cubic boron nitride - Marking and packaging
JB/T 7988.3-2001 — Superabrasives - Marking and packaging
Other editions:
JB/T 7988.2-1995 (earlier edition)
Standards on related subjects:
GB/T 2493-2023 — Test method for rotating strength of abrasive products
GB/T 2480-2022 — Conventional abrasive—Silicon carbide
JB/T 10155-2012 — Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper
JB/T 7994-2025 — Superhard abrasives - Chemical analysis method of cubic boron nitride
JB/T 7993-2025 — Chemical analysis method of boron carbide
JB/T 7990-2025 — Superhard abrasives - Cubic boron nitride powder
5 Classification and status
Chinese Standard Classification (CCS): J 43
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Editions of JB/T 7988.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7988.2-1999 | Superabrasives - Test method for impurities | current edition | Current |
| JB/T 7988.2-1995 | Superabrasives - Test method for impurities | previous edition | Superseded |
This page sells the current edition, JB/T 7988.2-1999. Earlier editions are listed for reference only.
How to Download JB/T 7988.2-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7988.3-2001 — Superabrasives - Marking and packaging
JB/T 7988.1-1995 — Synthetic diamond or cubic boron nitride - Determination of compressive strength
JB/T 7988.3-1995 — Synthetic diamond or cubic boron nitride - Marking and packaging
JB/T 7988.2-1999
$115.00