JB/T 7915-1995Needle roller bearings - Thrust needle roller and cage assemblies and thrust washers (English PDF)
滚针轴承 推力滚针和保持架组件、推力垫圈
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7915-1995 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 14, 1996
Implementation date
April 14, 1996
Scope
JB/T 7915-1995 is the English-translated version of 滚针轴承 推力滚针和保持架组件、推力垫圈.
JB/T 7915-1995 is the Chinese machinery industry standard covering needle roller bearings - Thrust needle roller and cage assemblies and thrust washers. It was issued on 14 April 1996 and has been in force since 14 April 1996, replacing GB 4605-1984.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1995 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7915-1995
National Standard of the People's Republic of China
- Replacing
- GB 4605-1984
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7915-1995 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 April 1996 and took effect the same day.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 7915-1995 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 5859-2023 — Rolling bearings—Self-aligning thrust roller bearings—Boundary dimensions
GB/T 4663-2017 — Rolling bearings—Cylindrical thrust roller bearings—Boundary dimensions
JB/T 7361-2007 — Rolling bearings - Test method for hardness of parts
JB/T 8919-2025 — Rolling bearings - Insert bearings and eccentric locking collars - Specifications
JB/T 5305-2025 — Rolling bearings - Thrust ball bearings with aligning seat washers - Geometricalproduct specifications (GPS) and tolerance values
JB/T 5306-2025 — Spherical plain bearings - Spherical plain bearing rod end with ball stud
5 Classification and status
Chinese Standard Classification (CCS): J 11
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 7915
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7915-1995 | Needle roller bearings - Thrust needle roller and cage assemblies and thrust washers | current edition | Current |
| GB 4605-1984 | Needle roller bearings - Thrust needle roller and cage assemblies and thrust washers | previous edition | Superseded |
This page sells the current edition, JB/T 7915-1995. Earlier editions are listed for reference only.
How to Download JB/T 7915-1995
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 7915-1995
$329.00