Valid

JB/T 79.3-1994Steel pipe flanges - Tongue and groove face integral cast steel pipe flanges (English PDF)

榫槽面整体铸钢管法兰

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 79.3-1994 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 9, 1994

Implementation date

October 1, 1995

Scope

JB/T 79.3-1994 is the English-translated version of 榫槽面整体铸钢管法兰.

JB/T 79.3-1994 is the Chinese machinery industry standard covering steel pipe flanges - Tongue and groove face integral cast steel pipe flanges. It was issued on 9 December 1994 and has been in force since 1 October 1995, replacing JB 79-1959.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1994 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 79.3-1994

National Standard of the People's Republic of China

Replacing
JB 79-1959

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 79.3-1994 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 December 1994 and has been in force since 1 October 1995.

It is one of 5 parts of the JB/T 79 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 79.3-1994 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 79-2015 — Integral steel pipe flanges

JB/T 79.1-1994 — Steel pipe flanges - Raised face integral cast steel pipe flanges

JB/T 79.2-1994 — Steel pipe flanges - Male and female face integral cast steel pipe flanges

JB/T 79.4-1994 — Steel pipe flanges - Ring joint face integral cast steel pipe flanges

Standards on related subjects:

GB/T 1048-2019 — Pipework components - Definition and selection of nominal pressure

GB/T 1047-2019 — Pipework components - Definition and selection of nominal size

GB/T 3765-2008 — 24° cone connectors - Specification

JB/T 75-2015 — Steel pipe flanges - Types and parameters

JB/T 74-2015 — Specification for steel pipe flanges

5 Classification and status

Chinese Standard Classification (CCS): J 15

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 79.3

EditionTitleRevisionStatus
JB/T 79.3-1994Steel pipe flanges - Tongue and groove face integral cast steel pipe flangescurrent editionCurrent
JB 79-1959Steel pipe flanges - Tongue and groove face integral cast steel pipe flangesprevious editionSuperseded

This page sells the current edition, JB/T 79.3-1994. Earlier editions are listed for reference only.

How to Download JB/T 79.3-1994

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 79.3-1994

$169.00