JB/T 7753-2007Rolling bearings - Bearings for blowers - Technical requirements (English PDF)
滚动轴承 鼓风机轴承 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7753-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 6, 2007
Implementation date
September 1, 2007
Scope
JB/T 7753-2007 is the English-translated version of 滚动轴承 鼓风机轴承 技术条件.
JB/T 7753-2007 is the Chinese standard "Rolling bearings - Bearings for blowers - Technical requirements". Its scope clause reads: This standard specifies technical requirements, measuring methods and inspection rules of blower bearings for power station (hereinafter referred to as "bearing").
This standard is applicable to blower bearings used for power station and also metallurgy and mine, etc. This standard is provided for production and inspection of manufacturer and user acceptance.
Found what you need?
Document preview — JB/T 7753-2007
National Standard of the People's Republic of China
- Replacing
- JB/T 7753-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Technical Requirements
- 4 Measuring Methods
- 5 Inspection Rules
- 6 Test
- 7 Marking, Rust Prevention and Packaging
1 Scope
This standard specifies technical requirements, measuring methods and inspection rules of blower bearings for power station (hereinafter referred to as "bearing").
This standard is applicable to blower bearings used for power station and also metallurgy and mine, etc. This standard is provided for production and inspection of manufacturer and user acceptance.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
GB/T 307.1-2005 Rolling Bearings - Radial Bearings - Tolerances (ISO 492: 2002, MOD)
GB/T 307.2-2005 Rolling Bearings - Measuring and Gauging Principles and Methods (ISO 1132-2: 2001, Rolling Bearings - Tolerances - Part 2: Measuring and Gauging Principles and Methods, MOD)
GB/T 307.3-2005 Rolling Bearings - General Technical Regulations
GB/T 3203-1982 Specification for Carburizing Steels of Bearings
GB/T 4604-2006 Rolling Bearings - Radial Internal Clearance (ISO 5753: 1991, MOD)
GB/T 8597-2003 Rolling Bearings - Rust Proof Packaging
GB/T 18254-2002 High-carbon Chromium Bearing Steel
JB/T 1255-2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel
JB/T 3573-2004 Rolling Bearings - Methods for the Measurement of Radial Internal Clearance
JB/T 3574-1997 Rolling Bearings - Marking for Products
JB/T 7051-2006 Rolling Bearing Parts - Methods for the Measurement and Assessment of Surface Roughness
JB/T 8881-2001 Specifications for Carburizing Heat Treatment of Rolling Bearing Parts
JB/T 8921-1999 Rolling Bearings and Commercial Parts - Inspection Rules
JB/T 10186-2000 Rolling Bearings - Specifications of Matched Angular Contact Ball Bearings […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 7753
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7753-2007 | Rolling bearings - Bearings for blowers - Technical requirements | current edition | Current |
| JB/T 7753-1995 | Rolling bearings - Bearings for blowers - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 7753-2007. Earlier editions are listed for reference only.
How to Download JB/T 7753-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 106-2024 — Valves marking and coating
JB/T 14540-2024 — Sanitary cam rotor pumps
JB/T 14754-2024 — Equipment for disposal of dead and diseased livestock and poultry
Secure payment via Stripe
Payments accepted
JB/T 7753-2007
$184.00