Valid

JB/T 7270.4-2014Small handle with sleeve (English PDF)

转动小手柄

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7270.4-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 9, 2014

Implementation date

November 1, 2014

Scope

JB/T 7270.4-2014 is the English-translated version of 转动小手柄.

JB/T 7270.4-2014 is the recommended Chinese machinery industry standard for the small handle fitted with a revolving sleeve. It gives the form and the dimensions of this small turning handle, the way it is marked and designated, and the technical requirements it must meet.

The scope is confined to the small revolving handle; the other handle shapes of the JB/T 7270 series are covered in their own parts. JB/T 7276 and JB/T 7277 are cited as normative references.

The part replaces JB/T 7270.4-1994, whose provisions it carries forward in revised form. Issued on 9 July 2014, it has applied since 1 November 2014.

Found what you need?

Document preview — JB/T 7270.4-2014

National Standard of the People's Republic of China

ICS
25.060.99
Replacing
JB/T 7270.4-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 7270.4-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.

It replaces the earlier edition JB/T 7270.4-1994.

It is one of 23 parts of the JB/T 7270 series.

2 Scope Preview

This standard is the recommended Chinese machinery industry standard for the small handle fitted with a revolving sleeve. It gives the form and the dimensions of this small turning handle, the way it is marked and designated, and the technical requirements it must meet. The scope is confined to the small revolving handle; the other handle shapes of the JB/T 7270 series are covered in their own parts. JB/T 7276 and JB/T 7277 are cited as normative references. The part replaces JB/T 7270.4-1994, whose provisions it carries forward in revised form.

JB/T 7270.4-2014 falls under ICS 25.060.99, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

JB/T 7276

JB/T 7277

4 Where this standard sits

It cites 2 standards, listed in full above.

It is one part of the JB/T 7270 series, of which this catalogue holds 23 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 7270.1-1994 — Handles

JB/T 7270.1-2014 — Handles

JB/T 7270.2-1994 — Curved handles

JB/T 7270.2-2014 — Curved handles

JB/T 7270.3-1994 — Straight handles

JB/T 7270.3-2014 — Straight handles

JB/T 7270.5-1994 — Revolving handles

JB/T 7270.5-2014 — Revolving handles

JB/T 7270.6-1994 — Curved revolving handles

JB/T 7270.6-2014 — Curved revolving handles

JB/T 7270.7-1994 — Tapered handles

JB/T 7270.7-2014 — Tapered cylindrical handles

JB/T 7270.8-1994 — Ball handles

JB/T 7270.8-2014 — Ball end handles

JB/T 7270.9-1994 — Single-arm counterweight handles

JB/T 7270.9-2014 — Single-lever counterweight handles

JB/T 7270.10-1994 — Double-arm counterweight handles

JB/T 7270.10-2014 — Double-lever counterweight handles

JB/T 7270.11-1994 — Folding handles

JB/T 7270.11-2014 — Fold-away handles

JB/T 7270.12-1994 — Adjustable clamping handles

JB/T 7270.12-2014 — Adjustable clamping handles

Other editions:

JB/T 7270.4-1994 (earlier edition)

Standards on related subjects:

JB/T 6374-2020 — Silicon carbide sealing rings for mechanical seals - Technical requirements

GB 11291.1-2011 — Robots for industrial environments - Safety requirements - Part 1: Robot

JB/T 8064.1-1996 — Compression gas springs - Technical specifications

7 Classification and status

International classification (ICS): 25.060.99

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 7270.4

EditionTitleRevisionStatus
JB/T 7270.4-2014Small handle with sleevecurrent editionCurrent
JB/T 7270.4-1994Small handle with sleeveprevious editionSuperseded

This page sells the current edition, JB/T 7270.4-2014. Earlier editions are listed for reference only.

How to Download JB/T 7270.4-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7270.4-2014

$55.00