JB/T 6944.1-2013Pellet Mill - Part 1: Technical Specifications for Die (English PDF)
颗粒饲料压制机 第1部分：压模
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6944.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 6944.1-2013 is the English-translated version of 颗粒饲料压制机 第1部分：压模.
JB/T 6944.1-2013 is the Chinese machinery industry standard for the die of a pellet mill, the first part of the JB/T 6944 series on feed pellet presses. It gives the types and basic parameters of the die and fixes the technical requirements, the test methods, the inspection rules and the requirements for packaging, transport and storage.
Its field of use is the dies of presses that compress feed into pellets. It quotes GB/T 321-2005, GB/T 1031-2009, GB/T 1184-1996 and GB/T 1800.2-2009. It replaces the 1999 edition, JB/T 6944.1-1999.
The standard is filed under Chinese classification B93 and international classification 65.060.99.
Found what you need?
Document preview — JB/T 6944.1-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 6944.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6944.1-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 6944.1-1999.
It is one of 5 parts of the JB/T 6944 series.
2 Scope
This standard is the Chinese machinery industry standard for the die of a pellet mill, the first part of the JB/T 6944 series on feed pellet presses. It gives the types and basic parameters of the die and fixes the technical requirements, the test methods, the inspection rules and the requirements for packaging, transport and storage. Its field of use is the dies of presses that compress feed into pellets. It quotes GB/T 321-2005, GB/T 1031-2009, GB/T 1184-1996 and GB/T 1800.2-2009. It replaces the 1999 edition, JB/T 6944.1-1999. The standard is filed under Chinese classification B93 and international classification 65.060.99.
3 Normative references
JB/T 6944.1-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 321-2005 — Preferred numbers -- Series of preferred numbers
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-2009
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6944-1993 — Pellet mills - Die mounting types and dimensions
JB/T 6944.2-1999 — Pellet mills - Press rollers - Technical specifications
JB/T 6944.2-2013 — Pellet Mill - Part 2: Technical Specifications for Drag Roll
JB/T 6944.3-2014 — Pellet Mill - Part 3: Ring-type Die Types and Dimensions for Installation
Other editions:
JB/T 6944.1-1999 (earlier edition)
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 321-2005Preferred numbers -- Series of preferred numbers
- GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.2-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
Similar standards
Editions of JB/T 6944.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6944.1-2013 | Pellet Mill - Part 1: Technical Specifications for Die | current edition | Current |
| JB/T 6944.1-1999 | Pellet Mill - Part 1: Technical Specifications for Die | previous edition | Superseded |
This page sells the current edition, JB/T 6944.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 6944.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 321-2005 — Preferred numbers -- Series of preferred numbers
Secure payment via Stripe
Payments accepted
JB/T 6944.1-2013
$149.00