Valid

JB/T 6643-2004Rolling bearings - Four-point contact ball bearings - Axial internal clearances (English PDF)

滚动轴承 四点接触球轴承 轴向游隙

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6643-2004 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 20, 2004

Implementation date

April 1, 2005

Scope

JB/T 6643-2004 is the English-translated version of 滚动轴承 四点接触球轴承 轴向游隙.

JB/T 6643-2004 is the Chinese standard "Rolling bearings - Four-point contact ball bearings - Axial internal clearances". Its scope clause reads: This standard specifies the axial internal clearances for four-point contact ball bearings (d<=600mm) with 35° contact angle for general uses.

This standard is applicable to finished bearing inspection by bearing manufacturer and finished bearing acceptance by purchaser. Its clauses include definitions; axial internal clearances value.

Found what you need?

Document preview — JB/T 6643-2004

National Standard of the People's Republic of China

Replacing
JB/T 6643-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Definitions
  • 4 Axial Internal Clearances Value
  • 5 Marking of Axial Internal Clearances
  • Appendix A (Informative) Increment of Axial Internal Clearances in Measuring Load

1 Scope

This standard specifies the axial internal clearances for four-point contact ball bearings (d<=600mm) with 35° contact angle for general uses.

This standard is applicable to finished bearing inspection by bearing manufacturer and finished bearing acceptance by purchaser.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.

GB/T 272-1993 Rolling Bearing - Identification Code

GB/T 6930-2002 Rolling bearings - Vocabulary (ISO 5593: 1997, IDT)

3 Definitions

Definition of Axial Internal Clearances specified in this standard is in accordance with the requirements in Article 05.08.03 of GB/T 6930-2002

4 Axial Internal Clearances Value

Axial internal clearances value of four-point contact ball bearings is in accordance with the requirements of Table 1. The increment of axial internal clearances in measuring load is detailed in Appendix A.

Table 1 Aaxial Internal Clearances Value In µm […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 6643

EditionTitleRevisionStatus
JB/T 6643-2004Rolling bearings - Four-point contact ball bearings - Axial internal clearancescurrent editionCurrent
JB/T 6643-1993Rolling bearings - Four-point contact ball bearings - Axial internal clearancesprevious editionSuperseded

This page sells the current edition, JB/T 6643-2004. Earlier editions are listed for reference only.

How to Download JB/T 6643-2004

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6643-2004

$35.00