JB/T 6354-2006Electroplated superabrasive products - Core drills (English PDF)
电镀超硬磨料制品 套料刀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6354-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 27, 2006
Implementation date
May 1, 2007
Scope
JB/T 6354-2006 is the English-translated version of 电镀超硬磨料制品 套料刀.
JB/T 6354-2006 is the Chinese machinery industry standard covering electroplated superabrasive products - Core drills. It was issued on 27 November 2006 and has been in force since 1 May 2007, replacing JB/T 6354-1992.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2006 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 6354-2006
National Standard of the People's Republic of China
- Replacing
- JB/T 6354-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 6354-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 27 November 2006 and has been in force since 1 May 2007.
It replaces the earlier edition JB/T 6354-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 6354-2006 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 6354-2023 (later edition)
JB/T 6354-1992 (earlier edition)
Standards on related subjects:
GB/T 2493-2023 — Test method for rotating strength of abrasive products
GB/T 2480-2022 — Conventional abrasive—Silicon carbide
JB/T 10155-2012 — Coated abrasives - Test method for grinding performance of abrasive cloth and abrasive paper
JB/T 3715-2026 — Bonded abrasive products - Depressed centre grinding wheel
JB/T 3234-2026 — Superabrasive - Polycrystalline diamond die blanks for wire drawing
JB/T 6353-2015 — Bonded abrasive products - Resin and rubber bonded thin grinding wheels
5 Classification and status
Chinese Standard Classification (CCS): J 43
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 6354
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6354-2006 | Electroplated superabrasive products - Core drills | current edition | Current |
| JB/T 6354-1992 | Electroplated superabrasive products - Core drills | previous edition | Superseded |
This page sells the current edition, JB/T 6354-2006. Earlier editions are listed for reference only.
How to Download JB/T 6354-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 6354-2006
$105.00