Valid

JB/T 6169-2006Metal Bellows (English PDF)

金属波纹管

Preview PDF

This is a limited preview

Buy now to download the full PDF (40 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6169-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2006

Implementation date

July 1, 2007

Scope

JB/T 6169-2006 is the English-translated version of 金属波纹管.

JB/T 6169-2006 is the Chinese standard "Metal Bellows". Its scope clause reads: This standard specifies the classification principle, the series division principle and the basic requirements and test methods for service performance of metal annular bellows (hereinafter referred to as bellows).

This standard is applicable to bellows used in instruments and sensors (referred to as sensitive bellows); it is also applicable to bellows used in various compensators, and those used in sealing and isolating devices, elastic supporting devices, shock absorbers and flexible connecting devices (referred to as universal bellows). Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 6169-2006

National Standard of the People's Republic of China

Replacing: JB/T 6169-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword II
1 Scope
2 Normative references
3 Terms and Definitions
4 Structure, corrugated shape and joint types
5 Manufacturing materials
6 Classification and specification series of bellows
7 Technical specifications
8 Test method
9 Inspection rules
10 Marking, packaging, transportation and storage
Annex B (Informative) Design of universal bellows
Table 1 Commonly-used corrugated shapes
Table 2 Commonly-used materials for bellows
Table 3 Ranges of operating temperature of commonly-used materials for bellows
Table 4 Commonly-used specifications series of sensitive bellows
Table 5 Maximum number of splicing welds of pipe blank
Table 6 Allowable deviations of geometric dimensions for bellows
Table 7 Allowable deviation limits for axial nominal spring rate
Table 8 Percentage of the residual deflection due to nominal axial movement of sensitive bellows
Table 9 Maximum change rate for pitch of convolution
Table 10 Items for end-of-manufacturing inspection and type inspection
Table A.1 Yield limits and K values of bellows materials
Table A.2 Convolution depth coefficients
Table B.1 Section shape factors
Table B.2 Ci values (for the first five natural frequencies)
Table B.3 Ci values (for the first five natural frequencies)
Table B.4 Table of Cp values (from Figure B.4)
Table B.5 Table of Cf values (from Figure B.3)
Table B.6 Table of Cd values (from Figure B.2)
Table B.7 Table of values of B1, B2 and B3 (from Figure B.1)
Figure 1 Schematic diagram for structures of bellows
Figure 2 Examples of joint types
Figure A.1 Curves of correlation coefficients A0, A1, A2 and B0
Figure B.1 B1, B2 and B3 of ohm-bellows
Figure B.2 Cd of U-bellows
Figure B.3 Cf of U-bellows
Figure B.4 Cp of U-bellows
Figure B.5 Unreinforced U-bellows
Figure B.6 Reinforced U-bellows
Figure B.7 ohm-bellows
Figure B.8 Bellows section
Figure B.9 Linear interpolation
Figure B.10 Linear interpolation
Figure B.11 Example of values taken from Cp list

1 Scope

This standard specifies the classification principle, the series division principle and the basic requirements and test methods for service performance of metal annular bellows (hereinafter referred to as bellows).

2 Normative references

The following standards contain provisions which, through reference in this text, constitute provisions of this national standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the referenced document applies.

GB 150-1998 Steel pressure vessels

GB/T 191 Packaging - Pictorial marking for handling of goods (eqv ISO 780: 1997)

GB/T 321 Preferred numbers - Series of preferred numbers

GB/T 699 Quality carbon structure steels

GB/T 912 Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels

GB/T 1047 Pipework components - Definition and selection of DN (nominal size) (GB/T 1047-2005; ISO 6708: 1995, MOD)

GB/T 1048 Pipework components - Definition and selection of PN (GB/T 1048-2005, ISO/CD 7268: 1996, MOD)

GB/T 1801 Limits and fits - Section of tolerance zones and fits (GB/T 1801-1999; eqv ISO 1829: 1975)

GB/T 1802 Limits and fits - Tolerance zones and fits for commonly-used holes and shafts size from 500mm to 3,150mm

GB/T 1803 Limits and fits - Tolerance zones for holes and shafts size up to 18 mm

GB/T 2059 Copper and copper alloy strip

GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1: 1999, IDT)

GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)

GB/T 3274 Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels (GB/T 3274-1988, neq GammaOCT 14637:1979)

GB/T 3280 Cold rolled stainless steel sheets and plantes

GB/T 4237 Hot rolled stainless steel sheets and plates (GB/T 4237-1992, neq JISG 4304: 1984)

GB/T 14992 Classification and designation for superalloys and high temperature intermetallic materials

GB/T 15010 Cold-rolled sheets of corrosion-resisting

GB/T 15464-1995 General-purpose specification for the packaging of instrumentation products

GB 16749-1997 Bellows expansion joints for pressure vessel

JB/T 4711-2003 Coating and packing for pressure vessels transport

JB/T 4730.2 Nondestructive testing of pressure equipments - Part 2: Radiographic testing

JB/T 10078 Elastic alloy sheets for sensor

YB/T 323 Beryllium bronze sheets and strips

YB/T 5256 3J1 and 3J53 alloy for elastic component technical requirement

3 Terms and Definitions

For the purposes of this document, the following terms and definitions apply:

3.1 nominal movement

given value in a product technical document, usually a design calculation value for the displacement which is the deviation of bellows from their original position due to their deflection under the action of force, moment and pressure, referring to the following three types of movement in general, namely, axial movement which is axial expansion and contraction of bellows, angular movement which is their axial bending, and transverse movement which is parallel dislocation of their port planes

3.2 nominal spring rate

given value in a product technical document, usually a design calculation value for stiffness which is the force or moment required for bellows to generate unit movement deflection (or the resistance or reaction moment generated by bellows when experiencing unit movement), varying according to the types of movement […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 40 pages — is available in the English PDF.

Similar standards

JB/T 8723-2022|JB/T 11620-2013|JB/T 11721-2013|JB/T 6171-2013|NB/T 11490-2024|GB/T 12777-2019

Editions of JB/T 6169

Edition	Title	Revision	Status
JB/T 6169-2006	Metal Bellows	current edition	Current
JB/T 6169-1992	Metal Bellows	previous edition	Superseded

This page sells the current edition, JB/T 6169-2006. Earlier editions are listed for reference only.

How to Download JB/T 6169-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.