JB/T 6003.2-2010Internal combustion engines - Oil coolers - Part 2: Tube and shell oil coolers - Specification (English PDF)
内燃机 机油冷却器 第2部分：管壳式机油冷却器 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6003.2-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 6003.2-2010 is the English-translated version of 内燃机 机油冷却器 第2部分：管壳式机油冷却器 技术条件.
JB/T 6003.2-2010 is a recommended Chinese machinery industry standard on the tube-and-shell oil coolers fitted to internal combustion engines. It gives the terms and definitions, the structural types, the technical requirements, the test methods and the inspection rules, and it covers marking, packaging, transport and storage.
It applies to the tube-and-shell oil coolers of internal combustion engines for cars, tractors, construction machinery and small vessels and of engine-driven generating sets.
Oil coolers of the same construction used in other hydraulic duties may also be made to it for reference. Classified J95 in the Chinese system and 27.020 in the international one, it was issued by the Ministry of Industry and Information Technology and replaces JB/T 8125-1999.
Found what you need?
Document preview — JB/T 6003.2-2010
National Standard of the People's Republic of China
- ICS
- 27.020
- Replacing
- JB/T 8125-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6003.2-2010 was issued by MIIT on 11 February 2010 and has been in force since 1 July 2010.
It is one of 6 parts of the JB/T 6003 series.
2 Scope
This standard is a recommended Chinese machinery industry standard on the tube-and-shell oil coolers fitted to internal combustion engines. It gives the terms and definitions, the structural types, the technical requirements, the test methods and the inspection rules, and it covers marking, packaging, transport and storage. It applies to the tube-and-shell oil coolers of internal combustion engines for cars, tractors, construction machinery and small vessels and of engine-driven generating sets. Oil coolers of the same construction used in other hydraulic duties may also be made to it for reference. Classified J95 in the Chinese system and 27.020 in the international one,
3 Normative references
JB/T 6003.2-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2828.1
GB/T 3821
GB 11122-2006
JB/T 6003.3
JB/T 10408
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6003-1992 — Plate-fin oil cooler cores for internal combustion engines - Technical specifications
JB/T 6003-2004 — Plate-fin oil coolers - Technical requirements
JB/T 6003.1-2014 — Part 1: Plate-fin coolers - Specifications
JB/T 6003.3-2008 — Part 3: Test method for heat transfer performance
JB/T 6003.3-2018 — Part 3: Test method for heat transfer performance
6 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3821Small and medium power internal combustion engines - Cleanliness limits and measurement methods
- GB 11122-2006Diesel engine oils
- JB/T 6003.3Internal combustion engines - Oil coolers - Part 3: Test method for heat transfer performance
- JB/T 10408Internal Combustion Engines - Heat Exchangers - Reliability Test Method
Similar standards
Editions of JB/T 6003.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6003.2-2010 | Internal combustion engines - Oil coolers - Part 2: Tube and shell oil coolers - Specification | current edition | Current |
| JB/T 8125-1999 | Internal combustion engines - Oil coolers - Part 2: Tube and shell oil coolers - Specification | previous edition | Superseded |
This page sells the current edition, JB/T 6003.2-2010. Earlier editions are listed for reference only.
How to Download JB/T 6003.2-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3821-2015 — Small and medium power internal combustion engines - Cleanliness limits and measurement methods
JB/T 10408-2004 — Internal combustion engines - Reliability test method for heat exchangers
Secure payment via Stripe
Payments accepted
JB/T 6003.2-2010
$105.00