JB/T 5949-1991Construction machinery - Drum brakes - Technical specifications (English PDF)
工程机械 蹄式制动器 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5949-1991 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 12, 1991
Implementation date
July 1, 1992
Scope
JB/T 5949-1991 is the English-translated version of 工程机械 蹄式制动器 技术条件.
JB/T 5949-1991 is the Chinese standard "Construction machinery - Drum brakes - Technical specifications". Its scope clause reads: This Standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage for shoe brake of wheel type construction machinery traveling crane brake system.
This Standard applies to shoe brake of wheel cranes, loaders, scrapers, backhoe loaders and other wheel engineering machinery traveling crane brake system (hereinafter referred to as the brake).
Its clauses include subject contents and application scope; technical requirements.
Found what you need?
Document preview — JB/T 5949-1991
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Subject contents and application scope3
- 2 Normative references3
- 3 Technical requirements4
- 4 Test methods8
- 5 Inspection classifications9
- 6 Marking, packaging, transportation and storage11
- 7 Quality assurance periods12
- components (Supplement)13
- Annex B Calculation method of rotational inertia (Supplement)14
- Annex C Records and reports of bench test (Reference)15
- Additional explanation16
- References and Original Chinese Documents17
1 Subject contents and application scope
This Standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage for shoe brake of wheel type construction machinery traveling crane brake system.
This Standard applies to shoe brake of wheel cranes, loaders, scrapers, backhoe loaders and other wheel engineering machinery traveling crane brake system (hereinafter referred to as the brake).
2 Normative references
JB 3935 Automotive brake--Performance requirements
JB/T 5937 Engineering machinery--General technical specifications for gray pig iron parts
JB/T 5938 Engineering machinery--General technical specifications for ductile iron castings
JB/T 5944 Engineering machinery--General technical specifications for heat-treated work pieces
JB/T 5936 Engineering machinery--General technical specifications for mechanical processed parts
JB/T 5943 Engineering machinery--General technical specifications for weldments
JB/T 5945 Engineering machinery--General technical specifications for assembling
JB/T 5947 Engineering machinery--General technical requirements for packaging
JB 8 Product plates
GB 5763 Brake linings for automobiles
GBn 257 Car brake lining (Supplement for shape, friction performance and impact strength)
JB 2805 Trucks and buses - Brake - Bench test methods
GB 2828 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
3 Technical requirements
Brake products shall comply with the provisions of this Standard and be manufactured according to the product drawings and technical documents approved by specified procedures, if there is any special requirements, it shall be executed according to the agreement between the user and the manufacturer.
3.1 Performance requirement
3.1.1
The initial braking speed of brake for the first, second and third effective performance tests is 20km/h, when the brake line pressure is the maximum value specified by the manufacturer, the braking torque of braking output shall not be less than the rated value.
3.1.2
During the first, second and third effective performance tests, the difference of the braking torque output - BETWEEN the initial braking speed is 40km/h AND the initial speed is 20km/h - shall not be more than 10%, counted in percentage.
3.1.3
Other performance requirements for the brake shall be consistent with the relevant provisions of JB 3935, and the performance requirements are shown in Table 1.
3.2 Materials
The raw materials used by the brakes shall have a formal mark and a certification of the manufacturing plant. The manufacturer shall carry out random checks, and the brakes can only be used after the qualification is confirmed.
3.3 Supporting parts and purchased parts
The supporting parts and purchased parts used by the brake must have product
Annex B
Calculation method of rotational inertia (Supplement)
B1 Calculation of rotational inertia
B1.1 When making brake test for double front wheels brake test at the same time, computational formula is as follows:
Where: IQ - Rotational inertia when making brake test for double front wheels brake test at the same time, N·m
2
;
G1 - Front axle load at empty-load transport position, N;
r - Rolling radius of tire, m;
beta - Front axle load transfer coefficient when empty-load braking.
B1.2 When Brake test is conducted for single front wheel, computational formula is as follows:
Where: IF - Rotational inertia when making brake test for single front wheel, N·m
2
Where psi - Adhesion coefficient of road surface;
hg - Height of center of gravity at empty-load transport position, m;
b - The distance between center of gravity and rear axle, m.
Annex C
Records and reports of bench test (Reference)
Table of Integral machine parameters and brake parameters
Vehicle model Manufacturer Exit-factory date
Machine quality at empty-load transport position kg
Tire type Rolling radius m
Axle load distribution:
Empty-load transport position, front N Rear N
Full-load transport position, front N Rear N
Height of center of gravity: At empty-load transport position m
At full-load transport position m
Position of center of gravity: The distance from the rear axle at empty-load transport position m
The distance from the rear axle at full load-transport position m
Wheelbase m Maximum speed km/h
Brake type: Front Rear
Brake manufacturing plant Exit-factory date
Driving method of brake: Front Rear
Diameter of brake wheel cylinder: Front Rear
Maximum brake line pressure MPa
Braking force ratio of front and rear axle
Rated braking torque: Front N · m
Rear N · m
Trademark of friction material Manufacturer Exit-factory date
The gap between friction lining pad and brake drum: Front mm
Rear mm
Trademark of brake fluid Manufacturer Exit-factory date
__________________________________
Additional explanation
This Standard is proposed and administered by Tianjin Research Institute of Construction
Machinery of the Ministry of Machinery and Electronics Industry.
This Standard is drafted by Tianjin Construction Machinery Research Institute, Yingkou
Construction Mechanical Clutch Factory and Xuzhou Construction Machinery Bridge Box
Factory.
Main drafters of this Standard are: Yang Xiuwen, Chen Shurong, and Wang Zhongru.
References and Original Chinese Documents
[1] JB/T 5949 Construction Machinery shoe brakes technical conditions […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 5949-1991
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 5949-1991
$75.00