Valid

JB/T 5948-1991Construction machinery - Caliper disc brakes - Technical specifications (English PDF)

工程机械 钳盘式制动器 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5948-1991 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 12, 1991

Implementation date

July 1, 1992

Scope

JB/T 5948-1991 is the English-translated version of 工程机械 钳盘式制动器 技术条件.

JB/T 5948-1991 is the Chinese standard "Construction machinery - Caliper disc brakes - Technical specifications".

Its scope clause reads: This Standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage for caliper disc brake of wheel type construction machinery traveling crane brake system.

This Standard applies to caliper disc brakes of loaders, scrapers, graders, dumpers and other wheel construction machinery traveling crane brake system (hereinafter referred to as the brake).

Its clauses include subject contents and application scope; technical requirements; quality assurance periods.

Found what you need?

Document preview — JB/T 5948-1991

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Subject contents and application scope3
  • 2 Normative references3
  • 3 Technical requirements4
  • 4 Test methods8
  • 5 Inspection classifications9
  • 6 Marking, packaging, transportation and storage10
  • 7 Quality assurance periods11
  • components (Supplement)12
  • Annex B Calculation method of rotational inertia (Supplement)13
  • Annex C Records and reports of bench test (Reference)14
  • Additional explanation15
  • References and Original Chinese Documents16

1 Subject contents and application scope

This Standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage for caliper disc brake of wheel type construction machinery traveling crane brake system.

This Standard applies to caliper disc brakes of loaders, scrapers, graders, dumpers and other wheel construction machinery traveling crane brake system (hereinafter referred to as the brake).

2 Normative references

JB 3935 Automotive brake--Performance requirements

JB/T 5937 Engineering machinery--General technical specifications for gray pig iron parts

JB/T 5938 Engineering machinery--General technical specifications for ductile iron castings

JB/T 5944 Engineering machinery--General technical specifications for heat-treated work pieces

JB/T 5936 Engineering machinery--General technical specifications for mechanical processed parts

JB/T 5945 Engineering machinery--General technical specifications for assembling

GB 5763 Brake linings for automobiles

GBn 257 Car brake lining (Supplement for shape, friction performance and impact strength)

JB 2805 Trucks and buses - Brake - Bench test methods

JB 8 Product plates

JB/T 5947 Engineering machinery - General technical specifications

GB 2828 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)

3 Technical requirements

Brake products shall comply with the provisions of this Standard and be manufactured according to the product drawings and technical documents approved by specified procedures, if there is any special requirements, it shall be executed according to the agreement between the user and the manufacturer.

3.1 Performance requirements

3.1.1

The initial braking speed of brake for the first, second and third effective performance tests is 20km/h, when the brake line pressure is the maximum value specified by the manufacturer, the braking torque output by brake shall be no less than the rated value.

3.1.2

During the first, second and third effective performance tests, the difference of the braking torque output - BETWEEN the initial braking speed is 40km/h AND the initial speed is 20km/h - shall not be more than 10%, counted in percentage.

3.1.3

Other performance requirements for the brake shall be consistent with the relevant provisions of JB 3935, and the performance requirements are shown in Table 1.

3.2 Materials

The raw materials used by the brakes shall have a formal mark and a certification of the manufacturing plant. The manufacturer shall carry out random checks, and the brakes can only be used after the qualification is confirmed.

3.3 Supporting parts and purchased parts

The supporting parts and purchased parts used by the brake must have product certifications; spot check shall be conducted by the manufacturer and the parts can only be assembled after passing the check.

6.2.1

The product packaging shall comply with relevant requirements of JB/T 5947.

6.2.2

Products shall be completed with moisture-roof and rust-roof treatment when being packaged.

6.2.3

Inlet opening and deflating valve shall be equipped with oil proof plug and protective cover.

6.2.4

Each product shall be accompanied with the following technical documents when delivery:

a. Product qualification certificate;

b. Accessories and spare parts catalog.

6.2.5

The external surface of packing cases shall indicate following contents:

a. Product model and name;

b. Product factory serial number and factory date;

c. Manufacturer name and address;

d. Consignee organization and address:

e. Gross weight/Net weight f. Names of the shipping and arrival station (port);

g. Transportation and storage mark.

6.3 Transportation and storage

There shall be rain-proof and moisture-roof measures during transportation and storage of products.

7 Quality assurance periods

Under the premise of compliance with the requirements of storage and use by the users, within 12 months from the date of delivery from the manufacturer (subject to invoice date), for any damage or abnormal working indeed caused by defects in manufacturing quality or material, the manufacturer shall be responsible to promptly repair or return the products.

Annex A

The technical requirements of main positions of the major components (Supplement)

A1 The technical requirements of main positions of major components are shown in Table

A1.

Table A1

Component name

Item Requirements Remarks

Clamp body

1. Dimensional accuracy of hydraulic cylinder bore

2. Surface roughness of hydraulic cylinder bore

3. Perpendicularity between hydraulic cylinder bore and mounting surface

4. Dimensional accuracy of coupling hole of the fixed friction lining pad

Comply with drawing

Integral type clamp

Piston

1. Dimensional accuracy of piston diameter

2. Surface roughness of piston encircle Ra

IT7

0.8µm

-

Wheel cylinder cover

1. Dimensional accuracy of matching diameter of wheel cylinder cover and hydraulic cylinder

2. Dimensional accuracy of O-ring seal groove

IT7

In line with the drawing

Integral type clamp

Friction lining pad

Parallelism of two end surfaces of the friction lining pad

Not greater than

0.04µm

-

Annex B

Calculation method of rotational inertia (Supplement)

B1 Calculation of rotational inertia

B1.1 When making brake test for double front wheels brake test at the same time, computational formula is as follows:

Where: IQ - Rotational inertia when making brake test for double front wheels brake test at the same time, N·m

2

;

G1 - Front axle load at empty-load transport position, N;

r - Rolling radius of tire, m;

beta - Front axle load-transfer coefficient when empty-load braking.

B1.2 When Brake test is conducted for single front wheel, computational formula is as follows:

Where: IF - Rotational inertia when making brake test for single front wheel, N·m

2

Where psi - Adhesion coefficient of road surface;

hg - Height of center of gravity at empty-load transport position, m;

b - The distance between center of gravity and rear axle, m.

Annex C

Records and reports of bench test (Reference)

C1 See JB 2805 Annex I for format of recording paper and format of drawing the various curves.

Table of Integral machine parameters and brake parameters

Vehicle model Manufacturer Exit-factory date

Machine quality at empty-load transport position kg

Tire type Rolling radius m

Axle load distribution:

Empty-load transport position, front N Rear N

Full-load transport position, front N Rear N

Height of center of gravity: At empty-load transport position m

At full-load transport position m

Position of center of gravity: The distance from the rear axle at empty-load transport position m

The distance from the rear axle at full-load transport position m

Wheelbase m Maximum speed km/h

Brake type: Front Rear

Brake manufacturing plant Exit-factory date

Driving method of brake: Front Rear

Diameter of brake wheel cylinder: Front Rear

Maximum brake line pressure MPa

Braking force ratio of front and rear axle

Rated braking torque: Front N · m

Rear N · m

Trademark of friction material Manufacturer Exit-factory date

The gap between friction lining pad and brake disc: Front mm

Rear mm

Trademark of brake fluid Manufacturer Exit-factory date

__________________________________

Additional explanation

This Standard is proposed and administered by Tianjin Research Institute of Construction

Machinery of the Ministry of Machinery and Electronics Industry.

This Standard is drafted by Tianjin Construction Machinery Research Institute, Yingkou

Construction Mechanical Clutch Factory and Xuzhou Construction Machinery Bridge Box

Factory.

Main drafters of this Standard are: Yang Xiuwen, Chen Shurong, and Wang Zhongru.

References and Original Chinese Documents

[1] JB/T 5948 Construction Machinery caliper disc brakes technical conditions […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 5948-1991

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5948-1991

$75.00