JB/T 54455-1999Wire EDM machines - Product quality grading (English PDF)
电火花线切割机 产品质量分等
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 54455-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 30, 1999
Implementation date
June 1, 2000
Scope
JB/T 54455-1999 is the English-translated version of 电火花线切割机 产品质量分等.
JB/T 54455-1999 is the Chinese standard "Wire EDM machines - Product quality grading". Its scope clause reads: This standard specifies the product quality grade requirements for reciprocating-wire (high-speed wire) electrical discharge wire-cutting machines.
It applies to reciprocating-wire (high-speed wire) electrical discharge wire-cutting machines of general purpose and normal accuracy, used for machining dies and parts, hereinafter referred to as "the machines".
Found what you need?
Document preview — JB/T 54455-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Quality grades
1 Scope
This standard specifies the product quality grade requirements for reciprocating-wire (high-speed wire) electrical discharge wire-cutting machines.
It applies to reciprocating-wire (high-speed wire) electrical discharge wire-cutting machines of general purpose and normal accuracy, used for machining dies and parts, hereinafter referred to as "the machines".
2 Normative references
The provisions contained in the following standards become provisions of this standard through reference in this standard. The editions shown were valid at the time of publication of this standard. All standards are subject to revision, and the parties using this standard should consider the possibility of applying the latest editions of the standards listed below.
GB/T 5226.1-1996 Electrical equipment of industrial machines - Part 1: General requirements
GB/T 7925-1987 Electrical discharge wire-cutting machines - Parameters
GB/T 7926-1987 Electrical discharge wire-cutting machines - Accuracy
GB/T 9969.1-1998 Instructions for use of industrial products - General rules
GB/T 13306-1991 Nameplates
GB 13567-1998 Safety requirements for the guarding of electrical discharge machines
GB/T 16769-1997 Measurement of the sound pressure level of metal-cutting machine tools
JB/T 6559-1993 Specification for the reliability test of the pulse power supply of electrical discharge machines
JB/T 6560-1993 Specification for the reliability test of the numerical control system of electrical discharge machines
JB/T 7445.2-1998 Designation of special-purpose machining machine tool models
JB/T 8491.1-1996 Heat treatment of machine tool parts - Annealing, normalizing and quenching and tempering
JB/T 8491.2-1996 Heat treatment of machine tool parts - Quenching and tempering
JB/T 8491.3-1996 Heat treatment of machine tool parts - Induction hardening and tempering
JB/T 8491.4-1996 Heat treatment of machine tool parts - Carburizing and carbonitriding, quenching and tempering
JB/T 8491.5-1996 Heat treatment of machine tool parts - Nitriding and carbonitriding
JB/T 9872-1999 General specifications for machined parts of metal-cutting machine tools
JB/T 9874-1999 General specifications for the assembly of metal-cutting machine tools
JB/T 9875-1999 Preparation of the technical documents accompanying metal-cutting machine tools
JB/T 10082-2000 Specification for electrical discharge wire-cutting machines
3 Quality grades
This standard grades the product on fourteen items under three headings: inspection of the finished product, quality inspection of the production process, and user service and feedback.
Inspection of the finished product covers nine items: general requirements, accuracy, working performance, reliability and stability, service life, safety guarding, compatibility with matching equipment, appearance and packaging.
Quality inspection of the production process covers four items: materials and heat treatment, quality of part machining, assembly quality, and protection against rust.
User service and feedback is one item.
To be assessed as a high-grade product, the enterprise must hold ISO 9000 quality system certification and the product must meet the high-grade requirements of this standard.
3.1 General requirements
For an acceptable product, the designation and parameters of the machine shall comply with JB/T 7445.2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 54455-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 54455-1999
$475.00