JB/T 5161-2013Pellet Mill (English PDF)
颗粒饲料压制机
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5161-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 5161-2013 is the English-translated version of 颗粒饲料压制机.
The pellet mill is the machine covered by JB/T 5161-2013, a recommended standard of the Chinese machinery industry. It fixes the type and the parameters of the pellet feed pressing machine and sets out the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transportation and storage.
Pellet presses form its field of use. The standard is classified B93 in China and 65.060.99 internationally, and was issued by the Ministry of Industry and Information Technology.
It quotes GB/T 1184, GB/T 2828.1, GB/T 3768, GB/T 5667, GB/T 6971, GB/T 9480, GB/T 13306 and JB/T 5673. Four earlier documents are superseded by it: JB/T 5161-1991, JB/T 5161.1-1999, JB/T 5169-1991 and JB/T 5170-1991.
Found what you need?
Document preview — JB/T 5161-2013
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 5161.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 5161-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 5161-1991.
It is one of 2 parts of the JB/T 5161 series.
2 Scope
The pellet mill is the machine covered by JB/T 5161-2013, a recommended standard of the Chinese machinery industry. It fixes the type and the parameters of the pellet feed pressing machine and sets out the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transportation and storage. Pellet presses form its field of use. The standard is classified B93 in China and 65.060.99 internationally, and was issued by the Ministry of Industry and Information Technology. It quotes GB/T 1184, GB/T 2828.1, GB/T 3768, GB/T 5667, GB/T 6971, GB/T 9480, GB/T 13306 and JB/T 5673. Four earlier documents are superseded by it: JB/T 5161-1991, JB/T 5161.1-1999, JB/T 5169-1991 and JB/T 5170-1991.
3 Normative references
JB/T 5161-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 2828.1
GB/T 3768
GB/T 5667-2008 — Productive testing methods for agricultural machinery
GB/T 6971
GB/T 9480
GB/T 13306
JB/T 5673
4 About this standard
Issued by: MIIT
English translation: about 20 pages
5 Related standards
Other parts of this standard:
JB/T 5161.1-1999 — Pellet mills - Types and basic parameters
Other editions:
JB/T 5161-1991 (earlier edition)
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 5667-2008Productive testing methods for agricultural machinery
- GB/T 6971Test method for feed mills
- GB/T 9480Tractors machinery for agriculture and forestry, powered lawn and garden equipment -- Operators manuals -- Content and presentation
Similar standards
Editions of JB/T 5161
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5161-2013 | Pellet Mill | current edition | Current |
| JB/T 5161.1-1999 | Pellet Mill | previous edition | Superseded |
This page sells the current edition, JB/T 5161-2013. Earlier editions are listed for reference only.
How to Download JB/T 5161-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13306-2011 — Plates
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Secure payment via Stripe
Payments accepted
JB/T 5161-2013
$345.00