Valid

JB/T 5054.3-2000Product drawings and design documents - Formats (English PDF)

产品图样设计文件 格式

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5054.3-2000 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

March 30, 2000

Implementation date

October 1, 2000

Scope

JB/T 5054.3-2000 is the English-translated version of 产品图样设计文件 格式.

JB/T 5054.3-2000 is the Chinese machinery industry standard covering product drawings and design documents - Formats. It was issued on 30 March 2000 and has been in force since 1 October 2000, replacing JB/T 5054.3-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2000 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 5054.3-2000

National Standard of the People's Republic of China

Replacing
JB/T 5054.3-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 5054.3-2000 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 March 2000 and has been in force since 1 October 2000.

It is one of 13 parts of the JB/T 5054 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 5054.3-2000 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 20 pages

4 Related standards

Other parts of this standard:

JB/T 5054.1-2000 — General

JB/T 5054.2-2000 — Basic requirements for drawings

JB/T 5054.4-2000 — Numbering principles

JB/T 5054.5-2000 — Completeness

JB/T 5054.6-2000 — Modification procedures

JB/T 5054.7-1991 — Standardization examination of product drawings and design documents

JB/T 5054.7-2001 — Standardization review

JB/T 5054.8-1991 — Product design and design documents common parts and pieces borrowed from management approach

JB/T 5054.8-2001 — Management of common parts

JB/T 5054.9-1991 — Product design and design document management rules

JB/T 5054.9-2001 — Management of borrowed parts

JB/T 5054.10-2001 — Management rules

Standards on related subjects:

GB/T 5097-2020 — Non-destructive testing--Penetrant testing and magnetic particle testing--Viewing conditions

GB/T 5616-2014 — Non-destructive testing—Guidelines for application

JB/T 6063.3-2025 — Nondestructive Testing - Materials for magnetic particle testing - Part 3: Dry non-fluorescent magnetic powder for wet method

JB/T 6063.2-2025 — Nondestructive Testing - Materials for magnetic particle testing - Part 2: Oil-based non-fluorescent magnetic powder for wet method

JB/T 6063.1-2025 — Nondestructive Testing - Materials for magnetic particle testing - Part 1: Non-fluorescent magnetic powder for dry method

5 Classification and status

Chinese Standard Classification (CCS): J 01

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

Editions of JB/T 5054.3

EditionTitleRevisionStatus
JB/T 5054.3-2000Product drawings and design documents - Formatscurrent editionCurrent
JB/T 5054.3-1999Product drawings and design documents - Formatsprevious editionSuperseded

This page sells the current edition, JB/T 5054.3-2000. Earlier editions are listed for reference only.

How to Download JB/T 5054.3-2000

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5054.3-2000

$345.00