JB/T 4096-1999High precision horizontal spindle surface grinding machines with reciprocating table - Testing of accuracy (English PDF)
高精度卧轴矩台平面磨床 精度检验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4096-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 20, 1999
Implementation date
January 1, 2000
Scope
JB/T 4096-1999 is the English-translated version of 高精度卧轴矩台平面磨床 精度检验.
JB/T 4096-1999 is the Chinese machinery industry standard covering high precision horizontal spindle surface grinding machines with reciprocating table - Testing of accuracy.
It was issued on 20 May 1999 and has been in force since 1 January 2000, replacing JB 4096-1985. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1999 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4096-1999
National Standard of the People's Republic of China
- Replacing
- JB 4096-1985
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 4096-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 May 1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 4096-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB/T 38193-2019 — Machine tools automatic production line for automobile gears
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
JB/T 6340.2-2025 — Roll grinding machines - Part 2: Specification
JB/T 6340.3-2025 — Roll grinding machine - Part 3: Accuracy Inspection of Grinding Wheel Head Moving Machine Tools
JB/T 3870.1-2019 — Snap gauge grinding machines - Part 1: Testing of the accuracy
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 4096
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4096-1999 | High precision horizontal spindle surface grinding machines with reciprocating table - Testing of accuracy | current edition | Current |
| JB 4096-1985 | High precision horizontal spindle surface grinding machines with reciprocating table - Testing of accuracy | previous edition | Superseded |
This page sells the current edition, JB/T 4096-1999. Earlier editions are listed for reference only.
How to Download JB/T 4096-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 4096-1999
$135.00