JB/T 3191-1999Boiler drum internals - Technical specifications (English PDF)
锅炉锅筒内部装置 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3191-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 6, 1999
Implementation date
January 1, 2000
Scope
JB/T 3191-1999 is the English-translated version of 锅炉锅筒内部装置 技术条件.
JB/T 3191-1999 is the Chinese standard "Boiler drum internals - Technical specifications". Its scope clause reads: This standard specifies manufacturing, installation and acceptance requirements of boiler drum internals.
This standard is applicable to fixed steam boiler drum internals. Its clauses include technical requirements.
Found what you need?
Document preview — JB/T 3191-1999
National Standard of the People's Republic of China
- Replacing
- JB 3191-1982
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Technical Requirements
- 3.1 Material
- 3.2 Welding
1 Scope
This standard specifies manufacturing, installation and acceptance requirements of boiler drum internals.
This standard is applicable to fixed steam boiler drum internals.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All the standards will be revised, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
JB/T 1613-1993 Specification for Welding of Boiler Pressure Parts
JB/T 1615-1991 Technique Specification for Painting and Packaging of Boiler
JB 3375-1991 Receiving Acceptance of Materials for Boiler Construction
3 Technical Requirements
3.1 Material
3.1.1
The materials for manufacturing drum internals shall meet design drawing provisions and relevant standards provisions.
3.1.2
Welding materials for manufacturing drum internals must have receiving acceptance by inspection department according to the requirements of JB 3375 and shall not be used until they are qualified.
3.2 Welding
3.2.1
During drum internals welding, arc strike shall not be carried out on the boiler drum body; if electric arc hits the boiler drum inwall, grinding or repair welding shall be carried out for the hit positions according to boiler drum requirements.
3.2.2
In the drum internals, for the bolted construction inconvenient for installation and disassembling, the nuts may be welded firmly on the corresponding position and the bolts shall be ensured to be convenient for installation and disassembling.
3.2.3
When welding the bolt, do not damage the thread and the bolt shall be vertical to the welded parts surface.
3.2.4
If the boiler drum is required for heat treatment, the relevant parts welded directly with the boiler drum shall be welded before heat treatment of the boiler drum. If after heat treatment, the non-compression components shall be welded on the boiler drum, the requirements of JB/T 1613 shall be complied with.
3.2.5
In the drum internals, all the seal weld shall meet the design drawing requirements and the weld shall be free from such defects as missing weld, burn through, crack and air hole.
3.3
In the drum internals, all the supports shall have adequate strength and stiffness and must be welded firmly to the boiler drum. The thickness of the steel plate piece used for sealing shall not be less than 3mm.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 3191
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3191-1999 | Boiler drum internals - Technical specifications | current edition | Current |
| JB 3191-1982 | Boiler drum internals - Technical specifications | previous edition | Superseded |
This page sells the current edition, JB/T 3191-1999. Earlier editions are listed for reference only.
How to Download JB/T 3191-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 3191-1999
$249.00