JB/T 3105-1992Woodworking single-end tenoning machines - Accuracy (English PDF)
木工单头直榫开榫机 精度
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3105-1992 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 1, 1992
Implementation date
January 1, 1993
Scope
JB/T 3105-1992 is the English-translated version of 木工单头直榫开榫机 精度.
JB/T 3105-1992 is the Chinese machinery industry standard covering woodworking single-end tenoning machines - Accuracy. It was issued on 1 July 1992 and has been in force since 1 January 1993, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1992 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 3105-1992
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 3105-1992 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 July 1992.
It is one of 4 parts of the JB/T 3105 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 3105-1992 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
One other standard in this catalogue cites it: GB 25490-2010.
It is one part of the JB/T 3105 series, of which this catalogue holds 4 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 3105.1-1999 — Single-end tenoning machines - Parameters
JB/T 3105.1-2014 — Woodworking single-end straight tenoning machines - Part 1: Parameters
JB/T 3105.2-2014 — Woodworking Single-end Straight Tenoning Machine - Part 2: Accuracy
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
JB/T 1647.2-2012 — Straight-side mechanical power presses - Part 2: Technical requirements
JB/T 3096.2-2010 — Bandsaw blade sharpening machines with automatic feed - Part 2: Accuracy
JB/T 3096.1-2010 — Bandsaw blade sharpening machines - Part 1: Parameters
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 3105-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 3105.1-2014 — Woodworking single-end straight tenoning machines - Part 1: Parameters
JB/T 3105.1-1999 — Single-end tenoning machines - Parameters
JB/T 3105.2-2014 — Woodworking Single-end Straight Tenoning Machine - Part 2: Accuracy
JB/T 3105-1992
$249.00