JB/T 3103.2-2010Band saw tooth punching - Part 2: Accuracy (English PDF)
锯条开齿机 第2部分：精度
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3103.2-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 14, 2010
Implementation date
October 1, 2010
Scope
JB/T 3103.2-2010 is the English-translated version of 锯条开齿机 第2部分：精度.
JB/T 3103.2-2010 is a recommended Chinese machinery industry standard on the accuracy of saw blade tooth punching machines. This part specifies the geometric accuracy of machines that punch the teeth of saw blades, and the methods used to test it.
It applies to woodworking saw blade tooth punching machines working on blades whose maximum width is not greater than 250 mm. It quotes JB/T 4171-1999. The Ministry of Industry and Information Technology issued it, the catalogue records the Chinese classification J65 and the international classification 79.120.10.
Found what you need?
Document preview — JB/T 3103.2-2010
National Standard of the People's Republic of China
- ICS
- 79.120.10
- Replacing
- JB/T 3103.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 3103.2-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 May 2010 and has been in force since 1 October 2010.
It replaces the earlier edition JB/T 3103.2-1999.
It is one of 3 parts of the JB/T 3103 series.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the accuracy of saw blade tooth punching machines. This part specifies the geometric accuracy of machines that punch the teeth of saw blades, and the methods used to test it. It applies to woodworking saw blade tooth punching machines working on blades whose maximum width is not greater than 250 mm. It quotes JB/T 4171-1999. The Ministry of Industry and Information Technology issued it, the catalogue records the Chinese classification J65 and the international classification 79.120.10.
JB/T 3103.2-2010 falls under ICS 79.120.10, in the field of wood technology.
This catalogue holds 60 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
JB/T 4171-1999 — Woodworking machine tools - General rules for testing of accuracy
4 Where this standard sits
It cites one other standard, JB/T 4171-1999, listed in full above.
It is one part of the JB/T 3103 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 3103.1-1999 — Saw tooth punching machines - Accuracy
JB/T 3103.1-2010 — 1: Parameters
Other editions:
JB/T 3103.2-1999 (earlier edition)
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
JB/T 1647.2-2012 — Straight-side mechanical power presses - Part 2: Technical requirements
JB/T 3105.2-2014 — Woodworking Single-end Straight Tenoning Machine - Part 2: Accuracy
JB/T 3105.1-2014 — Woodworking single-end straight tenoning machines - Part 1: Parameters
7 Classification and status
International classification (ICS): 79.120.10
Chinese Standard Classification (CCS): J 65
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of JB/T 3103.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3103.2-2010 | Band saw tooth punching - Part 2: Accuracy | current edition | Current |
| JB/T 3103.1-1999 | Band saw tooth punching - Part 2: Accuracy | previous edition | Superseded |
This page sells the current edition, JB/T 3103.2-2010. Earlier editions are listed for reference only.
How to Download JB/T 3103.2-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4171-1999 — Woodworking machine tools - General rules for testing of accuracy
JB/T 3103.1-1999 — Saw tooth punching machines - Accuracy
JB/T 3103.1-2010 — Band saw tooth punching - Part 1: Parameters
Secure payment via Stripe
Payments accepted
JB/T 3103.2-2010
$110.00