JB/T 3103.1-2010Band saw tooth punching - Part 1: Parameters (English PDF)
锯条开齿机 第1部分：参数
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3103.1-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 14, 2010
Implementation date
October 1, 2010
Scope
JB/T 3103.1-2010 is the English-translated version of 锯条开齿机 第1部分：参数.
JB/T 3103.1-2010 is the Chinese machinery industry standard covering band saw tooth punching, Part 1: Parameters. It was issued on 14 May 2010 and has been in force since 1 October 2010, replacing JB/T 3103.2-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2010 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 3103.1-2010
National Standard of the People's Republic of China
- Replacing
- JB/T 3103.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 3103.1-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 May 2010 and has been in force since 1 October 2010.
It replaces the earlier edition JB/T 3103.1-1999.
It is one of 3 parts of the JB/T 3103 series.
2 Scope Preview
JB/T 3103.1-2010 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 3103.2-1999 — Saw blade tooth setting machines - Parameters
JB/T 3103.2-2010 — 2: Accuracy
Other editions:
JB/T 3103.1-1999 (earlier edition)
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
JB/T 1647.2-2012 — Straight-side mechanical power presses - Part 2: Technical requirements
JB/T 3105.2-2014 — Woodworking Single-end Straight Tenoning Machine - Part 2: Accuracy
JB/T 3105.1-2014 — Woodworking single-end straight tenoning machines - Part 1: Parameters
5 Classification and status
Chinese Standard Classification (CCS): J 65
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 3103.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3103.1-2010 | Band saw tooth punching - Part 1: Parameters | current edition | Current |
| JB/T 3103.2-1999 | Band saw tooth punching - Part 1: Parameters | previous edition | Superseded |
This page sells the current edition, JB/T 3103.1-2010. Earlier editions are listed for reference only.
How to Download JB/T 3103.1-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 3103.2-2010 — Band saw tooth punching - Part 2: Accuracy
JB/T 3103.2-1999 — Saw blade tooth setting machines - Parameters
JB/T 3103.1-1999 — Saw tooth punching machines - Accuracy
Secure payment via Stripe
Payments accepted
JB/T 3103.1-2010
$95.00